G88302149230 CARLO GAVAZZI Paramètres sélectionnés CARACTERISTIQUES PRINCIPALES Module de sortie BOÎTIER Déc..

Output Module for Rollerblind Motor
Type G 8830 2149 230
Du line®
Fieldbus Installationbus
• Up/down control of 1 rollerblind motor
• Up/down interlocking for motor
• AC power supply
• Channel coding by GAP 1605
• Design for mounting in Euro box
Product Description Ordering Key
G 8830 2149 230
Dupline® output module for up/down control of one rollerblind motor. A built-in up/down interlocking function protects the motors. The motor requires two Dupline® channels, one for “UP” and one for “DOWN”. For intelli-
gent control of the rollerblind motors it is recommended to use the Master Generator G3800x01x which has this function built in.
Type: Dupline® Housing Receiver
No. of channels Output type Power supply
Type Selection
Supply Ordering no.
2 channel
5 A/250 VAC
230 VAC G 8830 2149 230
General Specifications
Supply Specifications
Power supply AC types Installations cat. III (IEC 60664) Rated operational voltage
through wire L & N 230 230 VAC ± 15% (IEC 60038)
Frequency 45 to 65 Hz Drop-out tolerance ≤ 40 ms Power consumption Typ. 3.3 VA Power dissipation ≤ 2 W
Transient protection volt. 230 4 kV
Output OFF delay
Upon loss of Dupline® carrier 20 ms
Power ON delay Typ. 2 s Power OFF delay ≤ 1 s Environment
Pollution degree 3 (IEC 60664)
Operating temperature -20° to +50°C (-4° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F)
Humidity (non-condensing) 20 to 80%
Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Dimensions (h x w x d) 50 x 50 x 30
Material ABS
Weight 100 g
Insulation voltage
Supply - Dupline® ≥ 4 kVAC (rms) Supply - Outputs ≥ 4 kVAC (rms) Dupline® - Outputs ≥ 4 kVAC (rms)
Consumption on Dupline®
Normal consumption ≤ 0.5 mA Consumption 1 relay on ≤ 1.8 mA Consumption 2 relay on ≤ 3.2 mA
Output Specifications
Outputs 1 SPST relay & 1 SPDT relay
Resistive loads AC 1 5 A/250 VAC (1250 VA) DC 1 0.25 A/250 VDC (62 W)
or
Inductive loads AC 15 2.5 A/230 VAC DC 13 5 A/24 VDC
Mechanical lifetime ≥ 30 x 106 operations
Electrical lifetime
(at max load) AC 1 ≥ 2.0 x 105 operations Operating frequency ≤ 7200 operations/h Insulation voltage
Outputs - Dupline® ≥ 4 kVAC (rms)
Response time 1 pulse train
Specifications are subject to change without notice (23.01.2007) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group