KNX-EIB

6190/49-101

2CKA006190A0040

-

Transformador para Estación Meteorológica

Transformador estacion meteo

For wind and/or rain sensor 6190/41and 6190/43. Output: 24 V~, max. 1A SELV Also suitable for supplying up to 5 thermoelectric valve drives 24 V, TSA/K 24.1. For power supply to weather station WS/S 4.1.

TS/K 1.1

TS/K1.1

-

Sensor de Temperatura para Regulador de Fan Coil

TSA/K 230.2

2CDG120049R0011

-

Accionador de Válvula Electrotérmica, 230 V

Actuador Valvula Elect. 230V

The Thermoelectric Valve Drives TSA/K are suited for opening and closing valves in Heating, Ventilating and Air-Conditioning (HVAC) systems. The devices are normally closed available in 230 V and 24 V with pluggable connecting cable. The shapely housing protects the device against splash water. The device is especially suited to control radiators, converter heaters and cooling ceilings for single room temperature controlling. The valve drive can be controlled with the Electronic Switch Actuator ES/S or with the Electronic Relay ER/U in combination with the Universal Interface US/U and a Room Thermostat. The easy and quick snap-on mounting on all common valves occurs via Valve Adapters VA/Z.

TSA/K 24.2

2CDG120050R0011

-

Accionador de Válvula Electrotérmica, 24 V

ACCIONADOR VÁLVULA ELECTR 24V

The Thermoelectric Valve Drives TSA/K are suited for opening and closing valves in Heating, Ventilating and Air-Conditioning (HVAC) systems. The devices are normally closed available in 230 V AC and 24 V AC/DC with pluggable connecting cable. The shapely housing protects the device against splash water. The device is especially suited to control radiators, converter heaters and cooling ceilings for single room temperature controlling. The valve drive can be controlled with the Electronic Switch Actuator ES/S or with the Electronic Relay ER/U in combination with the Universal Interface US/U and a Room Thermostat. The easy and quick snap-on mounting on all common valves occurs via Valve Adapters VA/Z.

UD/M 1.300.1

2CDG110012R0011

-

Módulo Actuador Regulador Universal, 1 canal, 300 VA

REGULADOR UNIVERSAL 1 CANAL 30

Module for plugging into the Room Controller Basis Device. It dims incandescent lamps, 230 V or low halogen lamps with up to 300 W/VA. Automatic load detection. Compensated against ripple-control and voltage fluctuations. Only 2 W minimum load.

UD/S 2.300.2

UD/S2.300.2

-

Actuador Regulador Universal, 2 canales, 300 VA, MDRC

UK/S 32.2

2CDG110071R0011

-

Concentrador Universal E/S, 32 canales, MDRC

CONCENTRADOR 32 E/S

To connect push buttons or signal lamps to the ABB i-bus®, e.g., in an operating/display tableau. It has 32 channels which can be freely parameterised as inputs/outputs using the ETS software. Requires an external 12/24 V DC auxiliary power supply.

US/E 1

GHQ6310009R0001

-

Protector contra Sobretensiones

PROTECTOR CONTRA SOBRETENSION

For connecting bus devices as well as for looping through or branching the bus cable. In blue as bus connecting terminal with surge protector.

US/U 12.2

2CDG110065R0011

-

Interface Universal, 12 canales, FM

INTERFACE PULSADORES 12C UNIV

The Universal Interface has 12 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons or LEDs. The LEDs are supplied by the device (1.5 mA), the series resistances are integrated.

US/U 2.2

GHQ6310074R0111

-

Interface Universal, 2 canales, FM

INTERFACE PULSADORES 2C UNIV

The Universal Interface has 2 channels which can be parameterised as inputs or outputs, e.g. for connection of conventional push-buttons, auxiliary contacts, LEDs and electronic relays ER/U 1.1. Requires ETS2 V1.2a.