Producto añadido correctamente a su carrito de la compra
EMR5-AWN500-1
134234
EATON-MOELLER
1
Relé de monitorización de fases; Multi-Función; 2 W; 300-500 V 50/60 Hz
Relé de supervisión de fase EMR5-AWN... según IEC/EN 60255-6, 22,5 mm de ancho, 300-500VAC 50/60Hz, secuencia de fase, fallo de fase, sobretensión, subtensión, desequilibrio, rotura del cable neutro, valores de umbral ajustables, retardo de respuesta/apagado: ninguno o 0,1 hasta 30 s
Relés temporizadores (KETR, KEMR, KESR)
* Producto nuevo en su embalaje original con todas las garantías y certificaciones de EATON-MOELLER
Gracias por su interés en nuestros productos, esperamos que el plazo indicado sea conveniente para usted.
Durante la tramitación del pedido podrá seleccionar el tipo de envío que mejor se adapte a sus necesidades: Aéreo Express 24Hrs, Terrestre Standard 48/72Hrs, etc.
Product range | EMR4+EMR5 measuring and monitoring relays | ||
Basic function | Phase monitoring relays | ||
Function | Multi-functional | ||
Power supply from the measuring circuit On-delay/off-delay: none = 0 or adjustable between 0.1 - 30 s Imbalance threshold values adjustable 2 - 25 % of mean value of phase voltages | |||
Monitoring voltage per phase | UN | V AC | 300 - 500 V AC, 50/60/400 Hz |
Mnitoring of | Phase sequence Phase failure Overvoltage Undervoltage Imbalance | ||
Threshold value | Umax420 - 500 V AC Umin300 - 380 V AC | ||
Adjustable threshold values | Overvoltage Undervoltage Imbalance | ||
Contact sequence | |||
Technical data in sheet catalogue | |||
Other technical data (sheet catalogue) | >Phase monitoring relays |
Technical data for design verification | |||
Heat dissipation capacity | Pdiss | W | 0 |
Operating ambient temperature min. | °C | -25 | |
Operating ambient temperature max. | °C | 60 | |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. | ||
10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.4 Clearances and creepage distances | Meets the product standard's requirements. | ||
10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. | ||
10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. | ||
10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. The specifications for the switchgear must be observed. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. The specifications for the switchgear must be observed. | ||
10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Relays (EG000019) / Phase monitoring relay (EC001441) | |||
Electric engineering, automation, process control engineering / Low-voltage switch technology / Monitoring equipment (low-voltage switch technology) / Asymmetry monitoring equipment ([email protected] [AKF097011]) | |||
Type of electric connection | Screw connection | ||
With detachable clamps | No | ||
Rated control supply voltage Us at AC 50HZ | V | 0 - 500 | |
Rated control supply voltage Us at AC 60HZ | V | 0 - 500 | |
Rated control supply voltage Us at DC | V | 0 - 0 | |
Voltage type for actuating | AC | ||
Phase sequence monitoring | Yes | ||
Phase failure monitoring | Yes | ||
Function under voltage detection | Yes | ||
Function over voltage detection | Yes | ||
Phase imbalance monitoring | Yes | ||
Voltage measurement range | V | 0 - 500 | |
Min. adjustable delay-on energization time | s | 0.1 | |
Max. permitted delay-on energization time | s | 30 | |
Min. adjustable off-delay time | s | 0.1 | |
Max. permitted off-delay time | s | 30 | |
Number of contacts as normally closed contact | 0 | ||
Number of contacts as normally open contact | 0 | ||
Number of contacts as change-over contact | 2 | ||
Width | mm | 22.5 | |
Height | mm | 78 | |
Depth | mm | 100 |
Product Standards | IEC 255-6; UL 508; CSA-22.2 No. 14-05; CE marking | ||
UL File No. | E29184 | ||
UL Category Control No. | NKCR, NKCR7 | ||
CSA File No. | UL report valid | ||
CSA Class No. | 3211-03 | ||
North America Certification | UL listed, certified by UL for use in Canada | ||
Degree of Protection | IEC: IP20, UL/CSA Type: - |
Característica | Valor |
---|---|
Ejecución de la conexión eléctrica (EF003961) | Conexión roscada |
Con abrazaderas extraíbles (EF003340) | No |
Alimentación externa requerida (EF003292) | No |
Función de supervisión de secuencia de fase (EF003412) | Sí |
Función de detección de pérdida de fase (EF003413) | Sí |
Función de detección de subtensión (EF003414) | Sí |
Función de detección de sobretensión (EF003415) | Sí |
Función de detección de asimetría (EF003416) | Sí |
Rango de medición de tensión (EF002486) | 0 V |
Tiempo mínimo de retardo de respuesta permitido (EF008190) | 0.1 s |
Tiempo máximo de retardo de respuesta permitido (EF008189) | 30 s |
Tiempo mínimo de retardo de desconexión ajustable (EF008192) | 0.1 s |
Tiempo máximo de retardo de desconexión permitido (EF008191) | 30 s |
Número de contactos normalmente cerrados (EF008255) | 0 |
Número de contactos normalmente abiertos (EF008256) | 0 |
Número de contactos inversores (EF008257) | 2 |
Anchura (EF000008) | 23 mm |
Altura (EF000040) | 100 mm |
Profundidad (EF000049) | 78 mm |
Título: | Tamaño: | Tipo: |
---|---|---|
PDF CATALOGO EATON AUTOMATIZACION ES.pdf | 18 Mbytes | |
PDF CATALOGO EATON CONTROL Y AUTOMATIZACION ES.pdf | 9 Mbytes | |
PDF CATALOGUE EATON EN.pdf | 51 Mbytes |
Ningún comentario por el momento.
Valoración: | |
Nombre: | |
Email: | |
Título: | |
Opinión: | |
¿Recomienda la compra de este producto? | |
Añadir comentario |
Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.