MS1D CARLO GAVAZZI Parámetros seleccionados FUNCIÓN Parada de emergencia CATEGORÍA SEGURIDAD 4 SALIDA DE SEG..

Emergency Stop and Safety Gate Modules
MS1D
• Safety Category 4 according to EN 954-1
• Category 0 Emergency Stop
• Redundant circuit
• 2 NO safety outputs
• 1 NO optocoupled auxiliary NPN output
• Self monitoring
• 24 VAC / VDC power supply
• Dual channel inputs
• Failure diagnosis by LEDs
• Feedback circuit for external contactors monitoring
Product Description
Ordering Key
MS1 D
Emergency Stop and Safety Gate modules according to EN 60204-1, EN 292-1 /-2, EN
418, EN 1088 and EN 954-1. This model is characterized by
dual channel input and 2 NO safety output contacts with force guided relay outputs.
Housing Application Controlled Devices Safety Category
Electrical Specifications
Power supply 24 VAC ± 10% 50-60Hz /
24 VDC ± 10%
Power consumption 7 VA / 7 W
Input current/voltage 100 mA @ 24 VDC
Safety outputs 2 NO
Auxiliary outputs 1 optocoupled NPN NO
55V 50mA
Safety output switching
voltage /current /capability 230VAC/8A/1840VA
Safety output
contact fuse protection 6 A fast or 4 A delayed
Insulation voltage 2.5 KV for signal parts
4.0 KV for safety output parts: Pollution degree 2
Overvoltage category III
Time Specifications Environmental Specifications
Delay on energisation ≤ 150 ms Delay on de-energisation ≤ 25 ms Recovery time ≥ 25 ms Channel simultaneity ≤ 200 ms
Operating temperature 0°C ... + 55°C
Storage temperature -25°C ... + 55°C
Mechanical Specifications
Protection degree terminals IP 20
Protection degree housing IP 30
Max cross section
of external conductors 4 mm2 rigid wire
2
Housing material ABS
2.5 mm
flexible wire
Housing type 45 mm housing models
Mounting DIN rail
Dimensions 45 x 75 x 110 mm
Weight 240 g
Specifications are subjected to change without notice (20.04.07) 1