UPS-CP-1KVA/240AC 2800274 PHOENIX CONTACT Single-phase UPS device in dual converter technology, according to.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

UPS-CP-1KVA/240AC 2800274 PHOENIX CONTACT Single-phase UPS device in dual converter technology, according to..





Ship on today

Single-phase UPS device in dual converter technology, according to three-stage classification code VFI-SS-111. Floor-mounted appliance, either for 19 rack mounting, 90° rotary LCD control panel, slot for SNMP card.

More details

Uninterruptible Power Supplies Ups

TRABTECH Power and Signal Quality - PHOENIX CONTACT

Uninterruptible power supply units - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

Related products

More info


Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area


Width483.00 mm
Height89.00 mm
Depth490.00 mm
Height unit2 U

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)0 °C ... 40 °C
Ambient temperature (storage/transport)0 °C ... 45 °C
Permissible humidity (operation)0 % ... 90 % (non-condensing)
Altitude≤ 1000 m
Input voltage range AC160 ... 288 V AC
Rated Power (Real Power)800 W
TopologyDouble conversion technology
Bridging time≥ 6 min.


Type19" rack/fixed housing
Noise level50.00 dB(A)
MTBF> 200000 h

Common characteristics

Apparent power1000 VA
Real power800 W
Power factor (cos phi)0.8
TopologyDouble conversion technology
Interfaces1x USB, 1x RS232
Slot for expansionSNMP adapter, relay card
Compatible operating systemsWindows, Unix, OS/2, Novell, Mac OS X
Emergency shutdown (EPO)yes

Input data

Input voltage range AC160 ... 288 V AC
Input nominal currentmax. 3.8 A
Frequency range AC50 / 60 Hz ±5 Hz (automatic recognition)
Power factor (cos phi)0.99 (with linear load)
Current distortion (THDi)< 6 % (at full load)
Residual current IPE≤ 3.5 mA
Typical switch-over timetyp. 0 ms
Power supply connector1 x L, N, PE

Output data

Output voltage range230 V AC ±1 % (200/208/220/230/240 V AC adjustable)
Output nominal currentmax. 4.35 A
Frequency range AC50 / 60 Hz (automatic recognition)
Frequency range AC (Battery mode)50 / 60 Hz ±0,1% (Battery mode)
Crest factor3:1
Current distortion (THD)< 3 % (linear load)
< 6 % (non-linear load)
Overload capabilityto 120 % (after 30 s, switch-over to bypass mode)
to 150 % (after 10 s, switch-over to bypass mode)
as of 151 % (immediate switch-over)
Efficiency (100/75/50/25% load)85/82/82/80% - mains operation

Battery system

Battery typeVRLA
Bridging time≥ 6 min.
Battery voltage12 V DC (per battery)
Battery capacity7.2 Ah
Number of batteries included1
Number of batteries per battery set3
Charging voltage41 V DC +/-0.5 V DC
Charge currentmax. 1.1 A
Charging time4 h (90% charge)
Discharge current30 µA ±10 µA
Battery replacementHot-Swap
Battery service life5 years ( ≤20°C / EUROBAT )

Standards and Regulations

Standards/specificationsEN 62040-1-1
EN 62040-2
EN 62040-3
IEC 60950-1
EN 61000-3-2
EN 61000-3-3
Standards/regulationsEN 62040-1-1
EN 62040-2
EN 62040-3
IEC 60950-1

[email protected]

[email protected] 4.027040603
[email protected] 4.127040603
[email protected] 5.027040603
[email protected] 5.127040603
[email protected] 6.027040603
[email protected] 7.027040603
[email protected] 8.027040601
[email protected] 9.027040705


ETIM 2.0EC000382
ETIM 3.0EC000382
ETIM 4.0EC000382
ETIM 5.0EC000382


UNSPSC 6.0130211510
UNSPSC 7.090139121011
UNSPSC 1139121011
UNSPSC 12.0139121011
UNSPSC 13.239121011

Datasheet - PDF


Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review