PSR-SPP- 60UC/ESAM4/3X1/1X2/B 2901427 PHOENIX CONTACT Safety relay for emergency stop and safety door monito.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSR-SPP- 60UC/ESAM4/3X1/1X2/B 2901427 PHOENIX CONTACT Safety relay for emergency stop and safety door monito..

PSR-SPP- 60UC/ESAM4/3X1/1X2/B

2901427

PHOENIX_CONTACT

Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal input voltage of 60 V AC/DC, plug-in spring-cage terminal block

More details


Safety

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Relays and security module and speed control. Safety - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

Related products

More info



Dimensions

Width22.5 mm
Height112 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Maximum altitude≤ 2000 m (Above sea level)

Input data

Nominal input voltage UN60 V AC/DC
Input voltage range in reference to UN0.85 ... 1.1
Typical input current at UN48 mA
Voltage at input/start and feedback circuit~ 24 V DC
Typical response time40 ms (man. start)
Typical pick-up time330 ms (when controlled via A1)
Typical release time90 ms (when controlled via A1)
20 ms (when controlled via S11/S12 and S21/S22)
Concurrence input 1/2
Recovery time1 s
Status displayGreen LED
Maximum switching frequency0.5 Hz
Max. permissible overall conductor resistance50 Ω

Output data

Contact type3 enabling current paths
1 signaling current path
Contact materialAgSnO2, + 0.2 µm Au
Minimum switching voltage10 V AC/DC
Maximum switching voltage250 V AC/DC
Limiting continuous current6 A (N/O contact)
5 A (N/C contact)
Inrush current, minimum10 mA
Maximum inrush current6 A
Sq. Total current72 A2
Interrupting rating (ohmic load) max.144 W (24 V DC, τ = 0 ms)
230 W (48 V DC, τ = 0 ms)
68 W (110 V DC, τ = 0 ms)
88 W (220 V DC, τ = 0 ms)
2000 VA (250 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load)48 W (24 V DC, τ = 40 ms)
40 W (48 V DC, τ = 40 ms)
35 W (110 V DC, τ = 40 ms)
33 W (220 V DC, τ = 40 ms)
Switching capacity min.100 mW
Output fuse10 A gL/gG NEOZED (N/O contact)
6 A gL/gG NEOZED (N/C contact)

General

Relay typeElectromechanical relay with forcibly guided contacts in accordance with EN 50205
Mechanical service lifeApprox. 107 cycles
Net weight242.55 g
Mounting typeDIN rail mounting
Degree of protectionIP54
IP20
Min. degree of protection of inst. locationIP54
Mounting positionany
Controlone and two channel
Parameters as per EN ISO 138494
Stop category0 (undelayed contacts)
Parameters for IEC 615083

Connection data

Connection methodSpring-cage connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.16
Stripping length8 mm

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2901427-PSR-SPP- 60UC/ESAM4/3X1/1X2/B English 142 Kbytes PHOENIX CONTACT-2901427-PSR-SPP- 60UC/ESAM4/3X1/1X2/B

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review