PSR-MC34-3NO-1DO-24DC-SP 2700548 PHOENIX CONTACT Safety relay for emergency stop and safety doors up to SILC.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PSR-MC34-3NO-1DO-24DC-SP 2700548 PHOENIX CONTACT Safety relay for emergency stop and safety doors up to SILC..

PSR-MC34-3NO-1DO-24DC-SP

2700548

PHOENIX_CONTACT

Safety relay for emergency stop and safety doors up to SILCL 3, Cat. 4, PL e, 2-channel operation, automatic or manual, monitored start, cross-circuit detection, 3 enabling current paths, US = 24 V DC, plug-in spring-cage terminal block

More details


* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

Related products

More info



Dimensions

Width12.5 mm
Height116.6 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 55 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Shock15g
Vibration (operation)10 Hz ...150 Hz, 2g
Maximum altitude≤ 2000 m (Above sea level)

Input data

Rated control circuit supply voltage US24 V DC -15 % / +10 %
Power consumption at UStyp. 2 W
Rated control supply current IStyp. 84 mA
Typical inrush current5 A (Δt = 200 µs at Us)
Current consumption< 5 mA (with Us/Ix to S12)
< 5 mA (with Us/Ix to S22)
> -5 mA (with Us/Ix to S22/0V)
> -5 mA (with Us/Ix to S34)
< 10 mA (with Us/Ix to S34)
Voltage at input/start and feedback circuit24 V DC -15 % / +10 %
Typical response time< 175 ms (automatic start)
< 175 ms (manual, monitored start)
Typical pick-up time< 250 ms (when controlled via A1)
Typical release time< 20 ms (when controlled via A1 or S12 and S22.)
Recovery time< 500 ms
Status display3 x green LED
Maximum switching frequency0.5 Hz
Max. permissible overall conductor resistance150 Ω
Filter time1 ms (at A1 in the event of voltage dips at Us)
max. 1.5 ms (at S12, S22; test pulse width)
min. 7.5 ms (at S12, S22; test pulse rate)
Test pulse rate = 5 x Test pulse width

Output data

Contact type3 enabling current paths
Contact materialAgSnO2
Minimum switching voltage20 V AC/DC
Maximum switching voltage250 V AC/DC
Limiting continuous current6 A (N/O contact; as the 23/24/34 contact path only occupies one input path, only a total current of 6 A is permitted here )
Inrush current, minimum3 mA
Maximum inrush current6 A
Sq. Total current72 A2 (see to derating)
Switching capacitymin. 60 mW
Output fuse6 A gL/gG (N/O contact)
4 A gL/gG (for low-demand applications)

General

Relay typeElectromechanical relay with forcibly guided contacts in accordance with IEC/EN 61810-3 (EN 50205)
Mechanical service life10 x 106 cycles
Net weight173.7 g
Mounting typeDIN rail mounting
Assembly instructionsSee derating curve
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Mounting positionvertical or horizontal
ControlTwo-channel
Parameters as per EN ISO 138494
Stop category0
Parameters for IEC 615083
Housing materialPBT

Connection data

Connection methodSpring-cage connection
pluggableYes
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.1.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.1.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.16
Stripping length8 mm

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2700548-PSR-MC34-3NO-1DO-24DC-SP English 138 Kbytes PHOENIX CONTACT-2700548-PSR-MC34-3NO-1DO-24DC-SP

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.