RFC 430 ETH-IB 2730190 PHOENIX CONTACT Remote Field Controller with 1x10/100 Ethernet, INTERBUS-Master, IP20.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

RFC 430 ETH-IB 2730190 PHOENIX CONTACT Remote Field Controller with 1x10/100 Ethernet, INTERBUS-Master, IP20..




Remote Field Controller with 1x10/100 Ethernet, INTERBUS-Master, IP20 degree of protection, pluggable parameterization memory (MC FLASH)

More details


Ethernet networks. Switches, routers, and antennas - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

* This article is obsolete. Please ask us for a quotation and we will check if there are units available or we will offer you an alternative product.

Related products

More info

Product description

Remote Field Controllers for Ethernet networks

When it comes to distributed, modular automation, Remote Field Controllers (RFC) with IEC 61131 control system intelligence and network connection are the ideal solution. Remote Field Controllers are compact, industrial PCs that provide networked, PC-based control performance on site with DIN rail mounting.

Integrated Ethernet connection

The integrated Ethernet network connection (via twisted pair) ensures Ethernet connectivity, an increasingly important factor.

The "DIN rail PCs" can be reached via Ethernet and TCP/IP by means of remote operation. Programming, operation, and visualization via the network enable innovative and cost-effective automation solutions.

When using the INTERBUS OPC server, standardized coupling with various visualization packages is also available via Ethernet.

IEC 61131 controller performance

Remote Field Controllers are based on the international PC/104 standard for embedded PC systems. All Remote Field Controllers are seamlessly configured and programmed according to IEC 61131 using the PC WORX automation software. PC WORX can be used locally on the serial interface or via the network (Ethernet).

The powerful processor can be programmed in all five IEC 61131 programming languages and ensures quick control task processing.

Ethernet communication

The integrated communication functions of the RFC ... ETH-IB modules enable direct and time-effective data exchange via Ethernet. The Ethernet TCP/IP protocol is used for universal possibilities to communicate with Remote Field Controllers. The standardized transport protocol TCP/IP is known worldwide and is available for all computer architectures and operating systems.

In the Ethernet network data is available in a standardized format using the INTERBUS OPC server.

Using the TCP/IP Send and Receive communication blocks according to the IEC-61131-5 standard, information between two Remote Field Controllers, e.g. necessary coupling variables, can be exchanged via Ethernet. This enables distributed, modular automation solutions to be configured. Even time synchronization is possible via the Ethernet network.


Width124 mm
Height185 mm
Depth190 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)0 °C ... 55 °C (from 45°C only with fan module)
Ambient temperature (storage/transport)-25 °C ... 70 °C
Permissible humidity (operation)5 % ... 90 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 90 % (non-condensing)
Air pressure (operation)80 kPa ... 108 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (up to 3000 m above sea level)
Shock25g, Criterion 1, according to IEC 60068-2-27
Vibration (operation)1g, Criterion 1, according to IEC 60068-2-6

Mechanical design

Format124 x 185 x 190 mm (W x H x D without fan and without key)
124 x 210 x 190 mm (W x H x D with fan and without key)
Weight1550 g
Note on weight specificationsWithout fan module
Weight1700 g
Note on weight specificationsWith fan module
Diagnostics displayyes
Controller redundancyNo

Data interfaces

InterfaceINTERBUS 2-wire remote bus
Connection methodD-SUB-9 female connector
Transmission speed500 kBaud / 2 MBaud (can be switched)
Connection methodRS-232-C, D-SUB connector, Ethernet 10/100 (RJ45)
Connection methodRJ45 socket
Transmission speed10/100 MBit/s
InterfaceEthernet 10Base-T/100Base-TX
Connection methodRJ45 socket
Transmission speed10/100 MBit/s

IEC 61131 runtime system

Programming toolPC WORX
Program memorytyp. 2 Mbyte (170 K instructions (IL))
Mass storage4 Mbyte
Retentive mass storage96 kByte (NVRAM)
Number of control tasks16
Realtime clockIntegrated (battery backup)

Power supply

Power supply connectionScrew terminal blocks, plug-in
Typical current consumption1.5 A
Supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (including ripple)
Residual ripple±5 %
Power dissipationmax. 20 W

Fieldbus function

Amount of process datamax. 8192 Bit (INTERBUS-Master)
Number of supported devicesmax. 512 (of which 254 are remote bus devices/bus segments)
Number of devices with parameter channelmax. 126

Direct I/Os

Input nameDigital inputs
Number of inputs5
Connection methodInline potential distributor
Output nameDigital outputs
Number of outputs3
Connection method2, 3, 4-wire
Maximum output current per channel500 mA
Without analog inputyes
Without analog outputyes
Without pulse direction outputyes
Without counter inputyes

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2730190-RFC 430 ETH-IB English 115 Kbytes PHOENIX CONTACT-2730190-RFC 430 ETH-IB

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.