QUINT-PS/2AC/1DC/24DC/20 2320830 PHOENIX CONTACT Primary-switched DIN rail power supply unit. AC input: suit.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

QUINT-PS/2AC/1DC/24DC/20 2320830 PHOENIX CONTACT Primary-switched DIN rail power supply unit. AC input: suit..

QUINT-PS/2AC/1DC/24DC/20

2320830

PHOENIX_CONTACT

Available

Ship on today

Primary-switched DIN rail power supply unit. AC input: suitable for operation between two phases (400 V AC). DC input: suitable for operation in an FI intermediate circuit. Output: 24 V DC/20 A.

More details


TRABTECH Power and Signal Quality - PHOENIX CONTACT

Uninterruptible power supply units - PHOENIX CONTACT

* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT

Quantity Price
1+520,29 €
2+515,73 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info



Product description

QUINT POWER power supply units – Superior system availability with SFB technology

Compact power supply units of the new QUINT POWER generation maximize the availability of your system. With the SFB technology (Selective Fuse Breaking Technology), six times the nominal current for 12 ms, even the standard power circuit-breakers can now also be triggered reliably and quickly. Faulty current paths are switched off selectively, the fault is located and important system parts continue to operate. Comprehensive diagnostics are provided through constant monitoring of output voltage and current. This preventive function monitoring visualizes critical operating modes and reports them to the control unit before an error can occur.

Dimensions

Width120 mm
Height130 mm
Depth125 mm

Ambient conditions

Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Maximum altitude≤ 2000 m

Input data

Nominal input voltage range2x 400 V AC ... 500 V AC
600 V DC
Input voltage range2x 360 V AC ... 575 V AC
450 V DC ... 840 V DC
AC frequency range45 Hz ... 65 Hz
Inrush surge current< 85 A (typical)
Power failure bypass> 20 ms (400 V AC)
Input fuse3.15 A (slow-blow, internal)
Choice of suitable circuit breakers10 A ... 16 A (Characteristic B, C)
Type of protectionTransient surge protection
Protective circuit/componentVaristor

Output data

Nominal output voltage24 V DC ±1 %
Setting range of the output voltage18 V DC ... 29.5 V DC (UIN ≥ 360 V AC / 480 V DC)
18 V DC ... 26 V DC (< 480 V DC)
Nominal output current20 A (-25 °C ... 60 °C)
POWER BOOST26 A (-25°C ... 40°C permanent, UOUT = 24 V DC )
SFB technology current reserve120 A (20 ms)
Derating60 °C ... 70 °C (2.5%/K)
Connection in parallelYes, for redundancy and increased capacity
Connection in seriesYes
Max. capacitive loadUnlimited
Active current limitationApprox. 27 A
Control deviation< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple< 50 mVPP (with nominal values)
Output power480 W
Peak switching voltages nominal load< 50 mVPP (20 MHz)
Maximum power dissipation in no-load condition11 W
Power loss nominal load max.51 W

General

Net weight2 kg
Efficiency> 92 % (600 V DC)
> 90.5 % (400 V AC)
Insulation voltage input/output1.5 kV AC (type test)
2 kV AC (routine test)
Protection classI
MTBF (IEC 61709, SN 29500)> 860000 h (40°C)
Mounting positionhorizontal DIN rail NS 35, EN 60715
Assembly instructionsAlignable: 5 mm horizontally, 15 mm next to active components, 50 mm vertically

Connection data, input

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.10
Stripping length8 mm
Screw threadM3

Connection data, output

Connection methodScrew connection
Conductor cross section solid min.0.2 mm²
Conductor cross section solid max.6 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.4 mm²
Conductor cross section AWG min.12
Conductor cross section AWG max.10
Stripping length8 mm
Screw threadM3

Datasheet - PDF

Title: Language: Size: Type:
PHOENIX CONTACT-2320830-QUINT-PS/2AC/1DC/24DC/20 English 127 Kbytes PHOENIX CONTACT-2320830-QUINT-PS/2AC/1DC/24DC/20

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review