ELR H5-IES-PT- 24DC/500AC-0,6 2903902 PHOENIX CONTACT Hybrid motor starter for reversing 3~ AC motors up to .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

ELR H5-IES-PT- 24DC/500AC-0,6 2903902 PHOENIX CONTACT Hybrid motor starter for reversing 3~ AC motors up to ..

ELR H5-IES-PT- 24DC/500AC-0,6




Ship on today

Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 0.6 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e and push-in connection

More details

INTERFACE Signal converters, switching devices, and power supply units - PHOENIX CONTACT

Solid state relays and power electronics. Relay - PHOENIX CONTACT

* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

1+131,68 €
2+128,12 €
3+126,35 €
4+125,22 €
6+123,98 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

Input data

Input nameDevice supply
Rated control circuit supply voltage US24 V DC
Rated control supply current IS40 mA
Protective circuitProtection against polarity reversal Parallel polarity protection diode
Surge protection
Operating voltage displayGreen LED
Status displayYellow LED
IndicationRed LED
Input nameControl input right/left
Rated actuating voltage UC24 V DC
Rated actuating current IC5 mA
Switching threshold9.6 V (“0” signal)
19.2 V (“1” signal)
Switching level< 5 V DC (For EMERGENCY STOP)
Protective circuitProtection against polarity reversal
Typical turn-off time< 30 ms

Output data load output

Rated operating voltage Ue500 V AC
Operating voltage range42 V AC ... 550 V AC
Load current range75 mA ... 600 mA (see to derating)
Trigger characteristic in acc. with IEC 60947Class 10A
Rated operating current at AC-510.6 A
Rated operating current at AC-53a0.6 A
Leakage current0 mA
Protective circuitSurge protection Varistor

Output data reply output

NoteConfirmation: floating change-over contact, signal contact
Contact type1 PDT

Connection data, control circuit

Connection nameControl circuits
Connection methodPush-in connection
Stripping length10 mm
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14


Switching frequency≤ 2 Hz (Load-dependent)
Mounting positionvertical (horizontal DIN rail, motor output below)
Assembly instructionsalignable, for spacing see derating
Operating mode100% operating factor
Standards/regulationsIEC 60947-1
EN 60947-4-2
IEC 61508
ISO 13849
Safety Integrity Level according to IEC 61508SIL 3 (safe shutdown)
SIL 2 (motor protection)
Category acc. to EN ISO 138493 (Safe shutdown)
Performance level according to ISO 13849e (Safe shutdown)


Width22.5 mm
Height99 mm
Depth114.5 mm

Ambient conditions

Ambient temperature (operation)-25 °C ... 70 °C (observe derating)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Degree of protectionIP20

Datasheet - PDF

PHOENIX CONTACT-2903902-ELR H5-IES-PT- 24DC/500AC-0,6English149 KbytesPHOENIX CONTACT-2903902-ELR H5-IES-PT- 24DC/500AC-0,6

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review