Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
FL MGUARD RS4000 TX/TX-P 2702259 PHOENIX CONTACT Router
FL MGUARD RS4000 TX/TX-P
2702259
PHOENIX_CONTACT
Router
I/O
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
More info
▲Key Commercial Data
| Orderkey | 2702259 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 437 (C-6-2017) |
| GTIN | 4055626064161 |
| Weight per Piece (excluding packing) | 660.000 g |
| Custom tariff number | 85176200 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Degree of protection | IP20 |
|---|---|
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Permissible humidity (operation) | 5 % ... 95 % (5 % ... 95%, relative humidity 95%, temporary condensation according to 3K7/IEC EN 60721-3-3 (except for wind-driven precipitation and ice buildup)) |
Interfaces
| Interface 1 | Ethernet |
|---|---|
| No. of ports | 2 (RJ45 ports) |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Transmission speed | 10/100 Mbps |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Supply voltage, data transmission, error, link, activity |
| Interface 3 | VPN - release button |
| Connection method | 24 V DC/250 mA can be connected as an option |
Function
| Basic functions | Router with intelligent firewall and OPC/Modbus inspector with ATEX and IECEx approval, from FW 8.5: VPN for up to 250 tunnels, CIFS Integrity Monitoring, redundancy function, metal housing, slot for SD memory card, extended temperature range, high-performance firewall/VPN: up to 124 Mbps / 40 Mbps |
|---|---|
| Supported browsers | HTTPS support required |
| Processor | 330 MHz |
| Status and diagnostic indicators | LEDs:P1, P2, Fault, State, Error, LAN, WAN |
| Signal contact control voltage | 24 V DC (typical) |
| Signal contact control current | 250 mA (short-circuit-proof) |
Security functions
| Dynamic Host Configuration Protocol (DHCP) support | Server or Relay Agent |
|---|---|
| Network Time Protocol (NTP) client | Client |
| Link Layer Discovery Protocol (LLDP) | As per protocol 802.2 |
| Remote Syslog Logging | On externals server |
| Virtual private network (VPN) throughput | max. 40 Mbps (Router mode, VPN bidirectional throughput) |
| max. 27 Mbps (Stealth mode, VPN bidirectional throughput) | |
| Number of VPN tunnels | 250 (Firmware 8.5 or later) |
| Encryption methods | DES, 3DES, AES-128, -192, -256 |
| Internet Protocol Security (IPsec) mode | ESP tunnel / ESP transport |
| Authentication | X.509v3 certificates with RSA or PSK |
| Data integrity | MD5, SHA-1, SHA 256, SHA-512 |
| 1:1 Network Address Translation (NAT) in the VPN | Supported |
| Firewall data throughput | max. 124 Mbps (Router mode, default firewall rules, bidirectional throughput) |
| max. 61 Mbps (Stealth mode, default firewall rules, bidirectional throughput) | |
| Firewall rules | Configurable stateful inspection firewall with full scope of functions, deep packet inspection for OPC classic |
| Filtering | MAC and IP addresses, ports, protocols |
| Protection against | IP spoofing, DoS and Syn Flood Protection |
| Routing | Standard routing, NAT, 1:1-NAT, port forwarding |
Supply voltage
| Supply voltage | 24 V DC (redundant) |
|---|---|
| Residual ripple | 3.6 VPP(within the permitted voltage range) |
| Supply voltage range | 11 V DC ... 36 V DC |
| Typical current consumption | 100 mA (at US= 24 V DC) |
| Max. current consumption | 0.24 A |
Conformity with EMC directives
| Developed in acc. with standard | IEC 61000-6.2 |
|---|---|
| Test standard | IEC 61000-4-2 (ESD) |
| Test result | 6 kV contact discharge, 8 kV air discharge |
| Test standard | IEC 61000-4-3 (immunity to radiated interference) |
| Test result | 10 V/m (80 MHz ... 2000 MHz) |
| Test standard | IEC 61000-4-4 (burst) |
| Test result | 2 kV power line, 1kV data line |
| Test standard | IEC 61000-4-5 (surge) |
| Test result | power line: 2 kV (line/earth), 1 kV (line/line), 1kV data line |
| Test standard | IEC 61000-4-6 (immunity to conducted interference) |
| Test result | 3 V (10 kHz ... 150 kHz), 10 V (150 kHz ... 80 MHz) |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
|---|---|
| Type of test | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 |
| Test result | Half-sine 30g, 18 ms, 3 axes |
| Type of test | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 |
| Test result | 5g, 150 Hz |
| Noise emission | EN 55022 / Class B |
| Noise immunity | EN 61000-6-2:2005 |
| Conformance | CE-compliant |
| ATEX | II 3G Ex nA IIC T4 Gc |
| IECEx | Ex nA IIC T4 Gc |
Classifications
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.