Product successfully added to your shopping cart
AXL E EC IOL8 DI4 M12 6M
2701531
PHOENIX_CONTACT
1
Distributed I/O device
I/O
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2701531 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 193 (C-6-2017) |
GTIN | 4046356763790 |
Weight per Piece (excluding packing) | 726.900 g |
Custom tariff number | 85176200 |
Country of origin | DE (Germany) |
Dimensional drawing | |
---|---|
Width | 60 mm |
Height | 185 mm |
Depth | 38 mm |
Note on dimensions | The height is 194.5 mm including the mounting plate. With fixing clips pulled out, the height is 212 mm. The depth is 38 mm including the mounting plate (30.5 mm without the mounting plate). |
Drill hole spacing | 198.5 mm |
Ambient temperature (operation) | -25 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % |
Permissible humidity (storage/transport) | 5 % ... 95 % |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP65/IP67 |
Housing material | Zinc die-cast |
---|---|
Mounting type | Wall mounting or DIN rail mounting; both with mounting plate. |
Net weight | 726.9 g |
Designation | EtherCAT® |
---|---|
No. of channels | 2 |
Connection method | M12 fast connection technology |
Note on the connection method | D-coded |
Designation connection point | Copper cable |
Transmission speed | 100 Mbps (with auto negotiation) |
Number of positions | 4 |
Designation | EtherCAT® |
---|---|
Equipment type | EtherCAT®slave |
System-specific protocols | Mailbox protocols CANopen®over EtherCAT® |
Mailbox protocols File access over EtherCAT® | |
Type of addressing | Auto-increment addressing |
Fixed position addressing | |
Logical addressing | |
Specification | ETG.1000 V1.02 |
Designation | Module electronics and sensors (US) |
---|---|
Connection method | M12 connector (T-coded) |
Number of positions | 4 |
Supply voltage | 24 V DC |
Nominal supply voltage range | 19.5 V DC ... 31.2 V DC (including all tolerances, including ripple) |
Current consumption | typ. 180 mA ±15 % (at 24 V DC) |
Designation | Actuators (UA) |
Connection method | M12 connector (T-coded) |
Number of positions | 4 |
Supply voltage | 24 V DC |
Nominal supply voltage range | 18 V DC ... 31.2 V DC (including all tolerances, including ripple) |
Current consumption | typ. 28 mA ±15 % (at 24 V DC) |
Input name | Digital inputs at pin 2 for type A ports |
---|---|
Description of the input | IEC 61131-2 type 1 |
Connection method | M12 connector, X01 ... X04 have double occupancy |
Connection technology | 3-wire |
Number of inputs | 4 |
Type of protection | Overload protection, short-circuit protection of sensor supply |
Input filter time | < 1000 µs |
Input voltage range "0" signal | -0.3 V DC ... 5 V DC |
Input voltage range "1" signal | 15 V DC ... 30 V DC |
Input frequency | 0.5 kHz |
Nominal input current at UIN | typ. 3 mA |
Description of the input | IO-Link ports in digital input (DI) mode |
Connection method | M12 connector, X01 ... X04 have double occupancy |
Connection technology | 3-wire |
Number of inputs | max. 8 (EN 61131-2 type 1) |
Nominal input voltage UIN | 24 V DC |
Input voltage range "0" signal | -0.3 V DC ... 5 V DC |
Input voltage range "1" signal | 15 V DC ... 30 V DC |
Nominal input current | typ. 3 mA |
Sensor current per channel | max. 200 mA (from L+/L-) |
Total sensor current | max. 1.6 A (from L+/L-) |
Input filter time | < 1000 µs |
Input frequency | 0.5 kHz |
Type of protection | Overload protection |
Short-circuit protection for the sensor supply |
Output description | IO-Link ports in digital output (DO) mode |
---|---|
Connection method | M12 connector, X01 ... X04 have double occupancy |
Connection technology | 3-wire |
Number of outputs | max. 8 |
Nominal output voltage | 24 V DC |
Maximum output current per channel | 150 mA |
Maximum output current per device | 1.2 A |
Nominal load, ohmic | 3.6 W (160 Ω, at nominal load) |
Nominal load, inductive | 3.6 VA (0.8 H, 160 Ω, at nominal load) |
Signal delay | max. 150 µs (when switched on) |
max. 200 µs (when switched off) | |
Switching rate | 1 per second, maximum (at nominal inductive load) |
Limitation of the voltage induced on circuit interruption | -15 V DC |
Output voltage when switched off | max. 1 V |
Output current when switched off | max. 300 µA |
Type of protection | Overload protection |
Short-circuit protection | |
Behavior with overload | Shutdown with automatic restart |
Test section | 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min. |
---|---|
24 V supply (communications power and sensor supply, IO-Link ports)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min. | |
24 V supply (communications power and sensor supply, IO-Link ports)/FE 500 V AC 50 Hz 1 min. | |
Bus connection (Ethernet 1)/FE 500 V AC 50 Hz 1 min. | |
Bus connection (Ethernet 2)/FE 500 V AC 50 Hz 1 min. | |
Bus connection (Ethernet 1)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/24 V supply (communications power and sensor supply, IO-Link ports) 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/bus connection (Ethernet 1) 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/bus connection (Ethernet 2) 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min. |
Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
---|---|
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse | |
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g | |
Protection class | III, IEC 61140, EN 61140, VDE 0140-1 |
China RoHS | Environmentally Friendly Use Period = 25; |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.