Product successfully added to your shopping cart
AXL F AI4 U 1H
2688501
PHOENIX_CONTACT
1
I/O module
I/O
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2688501 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 115 (C-6-2017) |
GTIN | 4046356744232 |
Weight per Piece (excluding packing) | 191.000 g |
Custom tariff number | 85389091 |
Country of origin | DE (Germany) |
Dimensional drawing | |
---|---|
Width | 35 mm |
Height | 126.1 mm |
Depth | 54 mm |
Note on dimensions | The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). |
Ambient temperature (operation) | -25 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP20 |
Designation | Axioline F connector |
---|---|
Connection method | Push-in connection |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 1.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 1.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 16 |
Stripping length | 8 mm |
Mounting type | DIN rail |
---|---|
Net weight | 191 g |
Note on weight specifications | with connectors and bus base module |
Designation | Axioline F local bus |
---|---|
No. of channels | 2 |
Connection method | Bus base module |
Transmission speed | 100 Mbps |
Designation | Axioline F local bus supply (UBus) |
---|---|
Supply voltage | 5 V DC (via bus base module) |
Current consumption | typ. 120 mA |
max. 150 mA | |
Power consumption | typ. 0.6 W |
max. 0.75 W | |
Designation | Supply for analog modules (UA) |
Supply voltage | 24 V DC (I/O supply and sensor supply) |
Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current consumption | max. 45 mA (IiS= 0 mA) |
typ. 118 mA (IiS= 4 x 20 mA (nominal load)) | |
max. 125 mA (IiS= 4 x 20 mA (nominal load)) | |
typ. 238 mA (IiS= 4 x 50 mA (full load)) | |
max. 245 mA (IiS= 4 x 50 mA (full load)) | |
Power consumption | typ. 1.5 W (at UBusand UA) |
max. 1.83 W (at UBusand UA) | |
Type of protection | Surge protection of the supply voltage |
Polarity reversal protection of the supply voltage | |
Transient protection supply voltage |
Description of the input | Differential inputs, voltage |
---|---|
Input name | Analog inputs |
Number of inputs | 4 |
Connection method | Push-in connection |
Connection technology | 2, 3, 4-wire |
Note regarding the connection technology | shielded, twisted pair |
A/D conversion time | 31.25 µs |
Resolution A/D | 16 bit |
Limit frequency (3 dB) | 30 Hz |
12 kHz | |
Type of protection | Transient protection of inputs |
Overload protection of the voltage inputs | |
Data formats | IB IL, S7-compatible |
Measured value representation | 16 bits (15 bits + sign bit) |
Voltage input signal | 0 V ... 5 V |
-5 V ... 5 V | |
0 V ... 10 V | |
-10 V ... 10 V | |
Input resistance of voltage input | 268 kΩ (typical) |
Common mode voltage range signal - ground | -50 V DC ... 50 V DC |
Input filter | 30 Hz, 12 kHz and mean-value generation (can be parameterized) |
Test section | 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. |
---|---|
5 V supply (logic)/analog inputs 500 V AC 50 Hz 1 min. | |
5 V supply (logic)/functional earth ground 500 V AC 50 Hz 1 min. | |
24 V supply (I/O)/analog inputs 500 V AC 50 Hz 1 min. | |
24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. | |
Analog inputs/functional earth ground 500 V AC 50 Hz 1 min. |
Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
---|---|
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g | |
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g | |
Protection class | III, IEC 61140, EN 61140, VDE 0140-1 |
REACh SVHC | Lead 7439-92-1 |
---|---|
China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
No hazardous substances above threshold values |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes | |
PHOENIX CONTACT-2688501-AXL F AI4 U 1H | 169 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.