Product successfully added to your shopping cart
AXL E PB IOL8 DI4 M12 6P
2701503
PHOENIX_CONTACT
1
Distributed I/O device
I/O
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2701503 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 203 (C-6-2017) |
GTIN | 4046356763554 |
Weight per Piece (excluding packing) | 552.000 g |
Custom tariff number | 85176200 |
Country of origin | DE (Germany) |
Dimensional drawing | |
---|---|
Width | 60 mm |
Height | 185 mm |
Depth | 30.5 mm |
Note on dimensions | The height is 212 mm including fixing clips. |
Drill hole spacing | 198.5 mm |
Ambient temperature (operation) | -25 °C ... 60 °C |
---|---|
Ambient temperature (storage/transport) | -25 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % |
Permissible humidity (storage/transport) | 5 % ... 95 % |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Degree of protection | IP65/IP67 |
Designation | PROFIBUS DP |
---|---|
No. of channels | 2 |
Connection method | M12 fast connection technology |
Note on the connection method | B-coded |
Designation connection point | Copper cable |
Transmission speed | 9.6 kbps ... 12 Mbps (Automatic baud rate detection) |
Transmission physics | PROFIBUS-DP-compliant copper cable |
Address area assignment | 1 ... 126, adjustable |
Number of positions | 5 |
Designation | PROFIBUS DP |
---|---|
Equipment type | PROFIBUS slave |
System-specific protocols | PROFIBUS protocols DP V1 |
Designation | Module electronics and sensors (US) |
---|---|
Connection method | M12 connector (T-coded) |
Number of positions | 4 |
Supply voltage | 24 V DC |
Nominal supply voltage range | 19.5 V DC ... 31.2 V DC (including all tolerances, including ripple) |
Current consumption | typ. 170 mA ±15 % (at 24 V DC) |
Designation | Actuators (UA) |
Connection method | M12 connector (T-coded) |
Number of positions | 4 |
Supply voltage | 24 V DC |
Nominal supply voltage range | 18 V DC ... 31.2 V DC (including all tolerances, including ripple) |
Current consumption | typ. 30 mA ±15 % (at 24 V DC) |
Nominal voltage for I/O supply | 24 V DC |
---|---|
Nominal current for every IO-Link port | max. 150 mA (at C/Q (pin 4), maximum of 1.6 A over all 8 IO-Link C/Q and L+ cables) |
max. 200 mA (at L+/L- (pin 1 and pin 3), during startup, up to 1.6 A for short periods) | |
max. 2 A (at UA(IO-Link B ports, pin 2 and pin 5)) | |
Type of protection | Overload protection |
Permissible cable length | < 20 m |
Input name | Digital inputs at pin 2 for type A ports |
---|---|
Description of the input | IEC 61131-2 type 1 |
Connection method | M12 connector, X01 ... X04 have double occupancy |
Connection technology | 3-wire |
Number of inputs | 4 |
Type of protection | Overload protection, short-circuit protection of sensor supply |
Input filter time | < 1000 µs |
Input voltage range "0" signal | -0.3 V DC ... 5 V DC |
Input voltage range "1" signal | 15 V DC ... 30 V DC |
Input frequency | 0.5 kHz |
Nominal input current at UIN | typ. 3 mA |
Description of the input | IO-Link ports in digital input (DI) mode |
Connection method | M12 connector, X01 ... X04 have double occupancy |
Connection technology | 3-wire |
Number of inputs | max. 8 (EN 61131-2 type 1) |
Nominal input voltage UIN | 24 V DC |
Input voltage range "0" signal | -0.3 V DC ... 5 V DC |
Input voltage range "1" signal | 15 V DC ... 30 V DC |
Nominal input current | typ. 3 mA |
Sensor current per channel | max. 200 mA (from L+/L-) |
Total sensor current | max. 1.6 A (from L+/L-) |
Input filter time | < 1000 µs |
Input frequency | 0.5 kHz |
Type of protection | Overload protection |
Short-circuit protection for the sensor supply |
Number of ports | 4 |
---|---|
Connection method | M12 fast connection technology |
Connection technology | 3-wire |
Port type | Class A |
Output description | IO-Link ports in digital output (DO) mode |
---|---|
Connection method | M12 connector, X01 ... X04 have double occupancy |
Connection technology | 3-wire |
Number of outputs | max. 8 |
Nominal output voltage | 24 V DC |
Maximum output current per channel | 150 mA |
Maximum output current per device | 1.2 A |
Nominal load, ohmic | 3.6 W (160 Ω, at nominal load) |
Nominal load, inductive | 3.6 VA (0.8 H, 160 Ω, at nominal load) |
Signal delay | max. 150 µs (when switched on) |
max. 200 µs (when switched off) | |
Switching rate | 1 per second, maximum (at nominal inductive load) |
Limitation of the voltage induced on circuit interruption | -15 V DC |
Output voltage when switched off | max. 1 V |
Output current when switched off | max. 300 µA |
Type of protection | Overload protection |
Short-circuit protection | |
Behavior with overload | Shutdown with automatic restart |
Test section | 24 V supply (communications power and sensor supply, IO-Link ports)/bus connection 500 V AC 50 Hz 1 min. |
---|---|
24 V supply (communications power and sensor supply, IO-Link ports)/FE 500 V AC 50 Hz 1 min. | |
Bus connection / FE 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/24 V supply (communications power and sensor supply, IO-Link ports) 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/bus connection 500 V AC 50 Hz 1 min. | |
24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min. |
Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
---|---|
Shock in acc. with EN 60068-2-27/IEC 60068-2-27 30g, 11 ms period, half-sine shock pulse | |
Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g | |
Protection class | III, IEC 61140, EN 61140, VDE 0140-1 |
China RoHS | Environmentally Friendly Use Period = 25; |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes | |
PHOENIX CONTACT-2701503-AXL E PB IOL8 DI4 M12 6P | 156 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.