No products
Product successfully added to your shopping cart
View larger
ELR H5-IES-SC-230AC/500AC-2 2900420 PHOENIX CONTACT Hybrid motor starter for reversing 3~ AC motors up to 50..
ELR H5-IES-SC-230AC/500AC-2
2900420
PHOENIX_CONTACT
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 230 V AC control voltage, adjustable overload shutdown and emergency stop function to SIL 3/PL e
INTERFACE Components (IF)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
More info
▲Input data
| Input name | Device supply |
|---|---|
| Rated control circuit supply voltage US | 230 V AC (50/60 Hz) |
| Rated control supply current IS | 4 mA |
| Protective circuit | Surge protection |
| Operating voltage display | Green LED |
| Status display | Yellow LED |
| Indication | Red LED |
| Input name | Control input right/left |
| Rated actuating voltage UC | 230 V AC |
| Rated actuating current IC | 7 mA |
| Switching threshold | 44 V AC (“0” signal) |
| 85 V AC (“1” signal) | |
| Switching level | < 5 V AC (For EMERGENCY STOP) |
| Typical turn-off time | < 70 ms |
Output data load output
| Rated operating voltage Ue | 500 V AC |
|---|---|
| Operating voltage range | 42 V AC ... 550 V AC |
| Load current range | 180 mA ... 2.4 A (see to derating) |
| Trigger characteristic in acc. with IEC 60947 | Class 10A |
| Rated operating current at AC-51 | 2.4 A |
| Rated operating current at AC-53a | 2.4 A |
| Leakage current | 0 mA |
| Protective circuit | Surge protection |
Output data reply output
| Note | Confirmation: floating change-over contact, signal contact |
|---|---|
| Contact type | 1 PDT |
Connection data, control circuit
| Connection name | Control circuits |
|---|---|
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Torque | 0.5 Nm ... 0.6 Nm |
General
| Switching frequency | ≤ 2 Hz (Load-dependent) |
|---|---|
| Mounting position | vertical (horizontal DIN rail, motor output below) |
| Assembly instructions | alignable, for spacing see derating |
| Operating mode | 100% operating factor |
| Designation | Standards/regulations |
| Standards/regulations | IEC 60947-1 |
| EN 60947-4-2 | |
| IEC 61508 | |
| ISO 13849 | |
| Safety Integrity Level according to IEC 61508 | SIL 3 (safe shutdown) |
| SIL 2 (motor protection) | |
| Category acc. to EN ISO 13849 | 3 (Safe shutdown) |
| Performance level according to ISO 13849 | e (Safe shutdown) |
Dimensions
| Width | 22.5 mm |
|---|---|
| Height | 99 mm |
| Depth | 114.5 mm |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 70 °C (observe derating) |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Degree of protection | IP20 |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes |
|
| PHOENIX CONTACT-2900420-ELR H5-IES-SC-230AC/500AC-2 | 152 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.