HLN-40H-42A MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 42VDC / 0.96A, IP64, cable outp..

LED driver.

Specially designed for powering LEDs directly in a steady stream.

Format in plastic boxIP64.

Input range90-305Vca47-63Hz.

Output in constant current960mA.Adjustable by external potentiometer (580-960mA).

Range of output voltage with current mode constant25,2 to 42Vccaccording to demade the load.

The output voltage in voltage mode constant42Vcc.Adjustable by external potentiometer (40-46Vcc).

Power:40,3 W.

Efficiency typical:88.5 per cent.

Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.

Input class I with grounding.

Factor corrector, power>0,95to 230vac at full load.

Operating temperature range of caseTcfrom-40ºCup+50ºC.

Dimensions (Length x Width x Height) [mm]:161 x 61.5 x 35.

3 years of warranty.

Manufacturer: MEAN WELL.

The series HLN are LED Drvers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.

This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current. The output current and the output voltage can be adjusted byexternal potentiometerslocated in the housing of the source.

You can also work in voltage mode constant giving a fixed voltage of 42V if the load is powered at constant voltage and does not overcome the maximum output power.

With plastic housing is isolated. A small and compact size makes it have high reliability and low cost. These sources are suitable for LED lighting and signalling mobile installations of interior and exterior. Suitable for wet environments and wet conditions. Complies with the requirements of security at the global level for lighting.