ADD-55B MEANWELL AC-DC Enclosed power supply with UPS function, Output 27.6VDC / 2A +5VDC / 4A +26.5VDC / 0...

UPS input switches and 2 outputs in continuous.

Format box of the grid.

Range of universal input88-264vac. 47-63Hz.

Outputs:

+5vdc:

Minimum intensity of output 0A.

Maximum output current 3 Amperes. Peak 4A.

+24vdc:

Output voltagefor the loadwith power: 27,6 Vdc.

Output voltage in battery mode: voltage of the battery.

Output intensity1.3 To. Peak 2A.

Float voltageadjustable24-29Vcc. (The setting of the float voltage also adjusts the output voltage of power supply).

Intensity of load0.16 -.

Power:55,1 W.

Type of batteries:Gel, AGM and wet.

Battery capacity:1-3Ah.

Efficiency typical:74%at full load with power.

Protection against deep discharge of the batteries.

No cut in output in the step feed mode to battery mode. 0ms transfer time.

LED to indicate proper output DC-OK.

Working temperature: from-10up+60 ° Cof ambient temperature. Consult the technical data sheet to see the curves of drift.

Dimensions (Length x Width x Height) [mm]:159 x 97 x 38.

2 years of warranty.

Manufacturer: MEAN WELL.

Series ADD-55 are Upss with input in ac and with two outputs in continuous with autonomy in case of power failure. When there is mains power the computer gives two outputs stable while charging the battery. In case of a power failure it keeps the outputs fed from the battery. These power supplies are suitable for security applications, access control and any application that must continue to function even with a power outage. It allows us to feed loads with different voltages from a network or from batteries in the event of a power failure.

These are protected against overloads, short-circuit in the output, sobrentesión output, low battery and reverse battery polarity (by fuse).