PLS+1611 686085 GENERAL ELECTRIC PULSAR-S+ section power contact 16A 1NO 1NC View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

PLS+1611 686085 GENERAL ELECTRIC PULSAR-S+ section power contact 16A 1NO 1NC





Ship on today

PULSAR-S+ section power contact 16A 1NO 1NC

More details

Energy Meters Control Analizers



* Brand new product in its original packaging covered by the warranties and certifications provided by GENERAL ELECTRIC

Quantity Price
1+38,97 €
4+36,51 €
8+35,62 €
12+35,18 €
16+34,93 €
*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

  • Function:
    Impulse switches are electromechanically controlled switches used to control single- or multi-phase medium-power loads while the control itself can be (very) low power. The device switches between 2 stable positions, each time a (brief) impulse energises its control circuit.

  • Application:
    Mainly used for the switching of lighting and heating equipment and/or to obtain a simplifi ed wiring in case the load needs to be controlled at reduced voltage and/or from more than 2 different places.

  • Features:
    • Besides the normal operation through electrically energising the coil, manual operation is possible at all times, except PLS series SA and SB.
    • The switch position is visualised by the position of the front handle for all devices, except PLS series SA and SB.
    • The central command version was developed to force several devices at the same time to the on or off position, independently of the current status of each individual device. Also in this case, the possibility of operating the device locally remains.
    • The safety terminals are equipped with captive Pozidriv screws and have IP20 protection degree.
    • An add-on auxiliary contact, add-on central-command module and a spacer are available.
    • 3 and 4 poles devices are multi voltage (except all-in central command).
    • The use of a large number of luminous push-buttons is possible.
    • Availability of sealing cap for coil and load terminals.


Status Active


FamilySection power contact for PULSAR S+ (left mounting)
Rated switching capacity (A)16A
Contact combination1NO 1NC
Number of modules1
Standard packing10
StandardsCE;IEC 60669-1;IEC 60669-2-2
Terminal capacity (diameter min/max)1.5 - 10 mm²
Operating temperature range (min/max)-20°C / +45°C


Weight0.058 kg


ETIM 5.0 EC001286
ETIM 6.0 EC001286

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review