Function: Relays are electromechanically controlled switches used to control low power loads.
Applications: Switching of lighting, heating, etc. Galvanic insulation of i.e. status signalisation lamps from a (high) power (high voltage) circuit. Galvanic insulation of PLC-inputs or outputs to avoid destruction through excessive voltage.
Features: The switch position is visualised by the position of the front handle. The safety terminals are equipped with captive Pozidriv screws and have IP20 protection degree. Add-on auxiliary contacts available. Because of the advanced product design, no spacers are needed. Increased safety: sealing caps for both coil and terminal are available.
Relays - Contax R+
Rated switching capacity (A)
Coil voltage (V)
Coil DC/AC factor
0.5:1 (12 Vdc)
NBN EN 60947-4-1, CE
Number of modules Drive module
Number of modules With section power contact
Coil Voltage range (in % from Un)
Electrical life service Mechanical
2 x 106 controls
-20°C / 45°C
Connection of the lamps
Possible volt/phase Fuse rating (gL)
Possible volt for non-compensated fluor-lamps
Switching on voltage NO contact
Switching on voltage NC contact
Switching off voltage NO or NC contact
Possible volt/phase Max volt AC-1- Operating mod
Possible volt/phase Max volt AC-1- Contactbloc
Possible volt/phase Max volt AC-1- Max volt AC-5b
Possible volt/phase Max volt AC-7b- Operating mod
Possible volt/phase Max volt AC-3- Contatcbloc
1.5 kW/250V 2.2kW/400V
Possible volt/phase Min volt per phase (at 5V)
Possible volt- sockets & incandes lamps (40 to 200W)
Possible volt for compensated fluor-lamps- Serie
Possible volt for compensated fluor-lamps- Parallel
Electrical life service Electrical at full voltage AC-1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.