DILET11-M-W 048891 EATON ELECTRIC Timing relay, 1W, 0.05s-60h, on-delayed, 400VAC View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

DILET11-M-W 048891 EATON ELECTRIC Timing relay, 1W, 0.05s-60h, on-delayed, 400VAC

DILET11-M-W

048891

EATON-MOELLER

Timing relay, 1W, 0.05s-60h, on-delayed, 400VAC

More details


Contactors up to 170A

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Delivery programme
Product range
DILET timing relays
Basic function
Timer relays
Function
On-delayed
Fixed timing function
Number of changeover contacts
1
Time range
0.05 s - 60 h
Time range




u0.15 - 3 min
0.5 - 10 min
3 - 60 min
0.15 - 3 h
0.5 - 10 h
3 - 60 h
Rated operational current
AC-11
230 V
Ie A 3
380 V 400 V 415 V
Ie A 3
AC-15
220 V 230 V 240 V
Ie A 3
Voltage range
ULN V 400 V AC, 50/60 Hz
Width
mm 45
Terminal marking according to EN 50042
General
Standards
Standard IEC/EN 61812
VDE 0435
Lifespan, mechanical
AC operated
Operations x 106 30
DC operated
Operations x 106 30
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
Open
°C -20 - +60
Enclosed
°C - 20 - + 45
Mounting position
As required
Mechanical shock resistance (IEC/EN 60068-2-27)
Half-sinusoidal shock, 20 ms
g
Make contact
g 4
Degree of protection
Terminals
IP20
Weight
kg 0.09
Terminal capacities
mm2
Solid
mm2 1 x (0.75 - 2.5)
2 x (0.75 - 2.5)
Flexible with ferrule
mm2 1 x (0.75 - 1.5)
2 x (0.75 - 1.5)
Solid or stranded
AWG 1 x (18 - 14)
Contacts
Rated impulse withstand voltage
Uimp V AC 6000
Overvoltage category/pollution degree
III/2
Rated insulation voltage
Ui V AC 600
Rated operational voltage
Ue V AC 440
Safe isolation to EN 61140
between coil and auxiliary contacts
V AC 250
between the auxiliary contacts
V AC 250
Making capacity
AC-14 cos ϕ = 0.3400 V
A 48
AC-15 cos ϕ = 0.3 220 V
A 50
DC-11 L/R - 40 ms
x Ie 1.1
Breaking capacity
AC-14 cos ϕ = 0.3440 V
A 3
AC-15 cos ϕ = 0.3220 V
A 3
DC-11 L/R - 40 ms
x Ie 1.1
Rated operational current
Ie A
AC--14
440 V
Ie A 3
AC-15
220 V 230 V 240 V
Ie A 3
DC-11
Note
Making and breaking conditions to DC13, time constant as stated
L/R max. 15 ms
A
24 V
Ie A 1.5
L/R max. 50 ms
A 1.2
Conv. thermal current
Ith A 6
Short-circuit rating without welding
Note
When supplied directly from mains or transformer > 1000 VA
Max. fuse, make contacts
A gG/gL 6
Max. fuse, break contacts
A gG/gL 6
Magnet systems
Rated operational voltage
Ue V
AC
400
Voltage tolerance
x Uc
Pick-up voltage
x Us
Min. pick-up voltage, AC operated
x Uc 0.85
Pick-up voltage AC operated, max.
x Uc 1.1
Power consumption
Pick-up AC
VA 0.5
Sealing AC
VA 0.5
Duty factor
% DF 100
Maximum operating frequency
Ops/h 4000
Minimum command time
AC
ms 50
Repetition accuracy (deviation)
%
Technical data for design verification
Rated operational current for specified heat dissipation
In A 6
Heat dissipation per pole, current-dependent
Pvid W 0.9
Equipment heat dissipation, current-dependent
Pvid W 0
Static heat dissipation, non-current-dependent
Pvs W 0.5
Heat dissipation capacity
Pdiss W 0
Operating ambient temperature min.
°C -20
Operating ambient temperature max.
°C 60
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
Relays (EG000019) / Timer relay (EC001439)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Relay and socket / Timed relay ([email protected] [AKF092010])
Type of electric connection
Screw connection
Function delay-on energization
Yes
Function delay on de-energization
No
Function floating contact on energization
No
Function floating contact on de-energization
No
Function star-delta
No
Function pulse shaping
No
Function flashing, starting with pause, fixed time
No
Function flashing, starting with pulse, fixed time
No
Clock function, starting with pause, variable
No
Clock function, starting with pulse, variable
No
With plug-in socket
No
Remote operation possible
No
Suitable only for remote control
No
Pluggable on auxiliary contact block
No
Rated control supply voltage Us at AC 50HZ
V 400 - 400
Rated control supply voltage Us at AC 60HZ
V 400 - 400
Rated control supply voltage Us at DC
V 0 - 0
Voltage type for actuating
AC
Time range
s 0.05 - 216000
Number of outputs, undelayed, normally closed contact
0
Number of outputs, undelayed, normally open contact
0
Number of outputs, undelayed, change-over contact
1
Number of outputs, delayed, normally closed contact
0
Number of outputs, delayed, normally open contact
0
Number of outputs, delayed, change-over contact
1
Outputs, reversible delayed/undelayed
Yes
With semiconductor output
No
Width
mm 45
Height
mm 58
Depth
mm 52
Approvals
Product Standards IEC/EN 61812-1; IEC/EN 60947-5-1; UL 508; CSA-22.2 No. 14; CE marking
UL File No. E29184
UL Category Control No. NKCR, NKCR7
CSA File No. 12528
CSA Class No. 3211-03
North America Certification UL listed, CSA certified
Degree of Protection IEC: IP20, UL/CSA Type: -
Characteristics
IL04910003Z (AWA2527-1587) Solid-state timing relay
>>

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.