Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
PSG480F24RM 172885 EATON ELECTRIC PSG480F24RM Power supply unit, 3-phase, 400-500VAC/24VDC, 20A
PSG480F24RM
172885
EATON-MOELLER
PSG480F24RM Power supply unit, 3-phase, 400-500VAC/24VDC, 20A
PSG480F24RM
Power supply unit, 3-phase, 400-500VAC/24VDC, 20A
Low-voltage industrial components > DC-power supply
Transformers
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
More info
▲Power supply unit, 3-phase, 400-500VAC/24VDC, 20A
Power supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 1.5-fold rated operational current for 5 s, PELV (EN 60204), SELV (EN 60950), Width: 140 mm, Height: 121 mm, Depth: 117.3 mm, Three-phase, Input voltage range: 320 - 600 V AC, (450 - 800 V DC), Nominal input voltage: 3 x 400 - 500 V AC, Rated output voltage: 24 V DC (± 2%), Rated output current: 20 A, Setting range for the output voltage: 24 - 28 V DC, Rated output power: 480 W, Degree of Protection: IP20, Heat dissipation: 53 W
General specifications
Product name
Eaton PSG power supply unit
Part no.
PSG480F24RM
EAN
4015081694730
Product Length/Depth
175 millimetre
Product height
170 millimetre
Product width
155 millimetre
Product weight
1.485 kilogram
Certifications
Mains harmonics limitation: EN 601000-3-2
Class2: UL1310 and CSA-C22.2 No. 223
PELV (EN 60204)
Electrical equipment of machines: IEC60204-1 (Overvoltage category III)
Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA-C22.2 No. 60950-1, CB scheme to IEC 60950-1
2014/30/EU
IEC/EN 61204-3
EN 50178/IEC 62103
SELV (EN 60950)
ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024
RoHS
EN 55011
2014/35/EU
Protection against electric shock: DIN 57100-410
UL 508
IEC Rated
CSA Std. C22.2
EAC
EN Listed
Class2: UL1310 and CSA-C22.2 No. 223
PELV (EN 60204)
Electrical equipment of machines: IEC60204-1 (Overvoltage category III)
Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA-C22.2 No. 60950-1, CB scheme to IEC 60950-1
2014/30/EU
IEC/EN 61204-3
EN 50178/IEC 62103
SELV (EN 60950)
ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024
RoHS
EN 55011
2014/35/EU
Protection against electric shock: DIN 57100-410
UL 508
IEC Rated
CSA Std. C22.2
EAC
EN Listed
Product Tradename
PSG
Product Type
Power supply unit
Product Sub Type
None
Catalog Notes
PELV (EN 60204), SELV (EN 60950)
Power Boost via 1.5-fold rated operational current for 5 s
Temperature derating: Vertical: > 50 °C (2.5% / °C), > 70 °C (5% / °C); Derating from Tamb > +50 °C
Power Boost via 1.5-fold rated operational current for 5 s
Temperature derating: Vertical: > 50 °C (2.5% / °C), > 70 °C (5% / °C); Derating from Tamb > +50 °C
Features & Functions
Electric connection type
Screw connection
Enclosure material
Aluminum
Features
Modular version
Output voltage stabilized
Stabilized
Mains overvoltage protection (against internal overvoltage)
Short-circuit-proof
Output voltage stabilized
Stabilized
Mains overvoltage protection (against internal overvoltage)
Short-circuit-proof
Fitted with:
Not accessible internal input fuse (T3.15 AH/500 V) for device protection
Functions
Secondary voltage adjustable
Transient overvoltage protection (varistor)
Transient overvoltage protection (varistor)
Number of phases
3
General information
Degree of Protection
IP20
NEMA 1
NEMA 1
Environmental class
3K3 (Climatic class, according to EN 60721)
Mounting Method
Rail mounting possible
Product category
Power supply
Voltage type
AC
Connection
L1 +, L2 –, L3 nc, PE ㊏, Input characteristics, DC duty
L1 +, L2 nc, L3 –, PE ㊏, Input characteristics, DC duty
L1 +, L2 nc, L3 –, PE ㊏, Input characteristics, DC duty
Connection type
Screw connection
LED indicator
Status indication of "DC OK": Green LED
Power consumption
500 VA
Rated operational current (Ie)
Max. 1 A at 3 x 400 V AC
Max. 0.75 A at 3 x 500 V AC
Max. 0.75 A at 3 x 500 V AC
Ambient conditions, mechanical
Shock resistance
30 g (300 m/s²) in all directions, Mechanical, According to IEC/EN 60068-2-27
Vibration resistance
10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions, (IEC/EN 60068-2-6)
Climatic environmental conditions
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
80 °C
Ambient storage temperature - min
-25 °C
Ambient storage temperature - max
85 °C
Climatic proofing
< 95 % relative humidity at +25 °C, no condensation
Terminal capacities
Terminal capacity (flexible with ferrule)
Secondary side: 3.3 - 5.3 mm²
Primary side: 0.82 - 8.4 mm²
Primary side: 0.82 - 8.4 mm²
Terminal capacity (flexible with ferrule AWG)
Secondary side: 12 - 10
Primary side: 18 - 8
Primary side: 18 - 8
Stripping length (main cable)
7 mm
Tightening torque
0.9 Nm, Screw terminals, Primary side
0.9 Nm, Screw terminals, Secondary side
0.9 Nm, Screw terminals, Secondary side
Safety
Protection class
1 (with PE connection)
Current limitation
Overcurrent = 150 % of max. output power, at short-circuit, safety and safety features
Insulation resistance
1.5 kV AC (input)
1.5 kV AC (output)
4 kV AC (input/output)
1.5 kV AC (output)
4 kV AC (input/output)
Mean time between failures (MTBF)
> 300,000 h
Input characteristics
Input voltage at AC 50 Hz - min
320 V
Input voltage at AC 50 Hz - max
600 V
Input voltage at DC - min
450 V
Input voltage at DC - max
800 V
Inrush current
Voltage source up to 3 kVA: < 50 A with 3 x 400 V AC & 3 x 500 V AC (Inrush current limitation I²t (+25 °C))
Voltage source up to 18 kVA: < 120 A with 3 x 400 V AC & 3 x 500 V AC (Inrush current limitation I²t (+25 °C))
Voltage source up to 18 kVA: < 120 A with 3 x 400 V AC & 3 x 500 V AC (Inrush current limitation I²t (+25 °C))
Leakage current at ground IPE - max
< 3.5 mA (at 500 V AC)
Mains failure bridging
> 20 ms (with 3 x 500 V AC)
> 20 ms (with 3 x 400 V AC)
> 20 ms (with 3 x 400 V AC)
Ramp/run-up time
< 1000 ms
Short-term interruption
100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start, Input characteristics
Supply frequency
47 Hz, Input, min. Range
50/60 Hz, Input, Rated value
63 Hz, Input, max. Range
50/60 Hz, Input, Rated value
63 Hz, Input, max. Range
Supply voltage at AC, 50 Hz - min
320 V AC
Supply voltage at AC, 50 Hz - max
600 V AC
Supply voltage at DC - min
0 V DC
Supply voltage at DC - max
0 V DC
Tripping characteristic
B
Output characteristics
Residual ripple
< 50 mV / < 150 mV
Capacitive load
10000 µF max. Capacitive load starting, Output characteristics
Efficiency
> 90 % (3 x 500 V AC)
> 90 % (3 x 400 V AC)
> 90 % (3 x 400 V AC)
Output
Parallel switching for redundancy, with O ring diode (PSG480R24RM/PSG960R24RM)
Output current at AC, 50 Hz - max
20 A
Output voltage at DC - min
24 V
Output voltage at DC - max
28 V
Rated output power
480 W
Voltage tolerance
± 2 %, Rated output voltage
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
53 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 9.0
Low-voltage industrial components (EG000017) / DC-power supply (EC002540)
Electric engineering, automation, process control engineering / Power supply devices / Power supply device / Continuous current supply (ecl@ss13-27-04-07-01 [AFX040008])
Voltage type (supply voltage)
AC
1st secondary output voltage
24 - 24 V
2nd secondary output voltage
0 - 0 V
3rd secondary output voltage
0 - 0 V
Max. output current 1
20 A
Max. output current 2
0 A
Max. output current 3
0 A
Secondary voltage adjustable
Yes
Nominal value output voltage 1
24 V
Nominal value output voltage 2
0 V
Nominal value output voltage 3
0 V
Nominal value output current 1
20 A
Nominal value output current 2
0 A
Nominal value output current 3
0 A
Short-circuit-proof
Yes
Rated supply voltage AC 50 Hz
320 - 600 V
Rated supply voltage AC 60 Hz
320 - 600 V
Rated supply voltage DC
0 - 0 V
Output voltage stabilized
Yes
Power consumption
500 VA
Power output
480 W
Stabilized
Yes
Type of electric connection
Screw connection
Rail mounting possible
Yes
Wall mounting possible
No
Modular version
Yes
Width in number of modular spacings
0
Built-in width
140 mm
Built-in height
121 mm
Direct mounting possible
No
Width
155 mm
Height
170 mm
Depth
175 mm
Suitable for safety functions
No
SIL according to IEC 61508
None
Performance level according to EN ISO 13849-1
None
Degree of protection (IP)
IP20
Degree of protection (NEMA)
1
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF EATON CONTROL TRANSFORMES EN.pdf | 4 Mbytes |
|
| PSG480F24RM PSG480F24RM 172885 EN_172885.pdf | 126 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.