Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
AT4/11-S/IA/F2 009992 EATON ELECTRIC Position switch, 1N/O+1N/C, wide, IP65 x, spring-rod actuator
AT4/11-S/IA/F2
009992
-
EATON-MOELLER
Position switch, 1N/O+1N/C, wide, IP65_x, spring-rod actuator
Sensors > End switch
Position Switches
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
More info
▲Position switch, 1N/O+1N/C, wide, IP65_x, spring-rod actuator
Position switch, Basic function: Position switches, Part group reference: AT4, Product range: Spring-rod actuator, Degree of Protection: IP65, Features: Complete unit, Ambient temperature: -25 - +70 °C, Snap-action contact: Yes, Description: Not to be used as a safety position switch, Contacts N/O = Normally open: 1 N/O, Contacts N/C = Normally closed: 1 NC, Colour Enclosure covers: Grey, Housing: Insulated material, Connection type: Screw terminal, Rod length: 130 mm, Standards: IEC/EN 60947
Delivery program
Basic function
Position switches
Part group reference
AT4
Product range
Spring-rod actuator
Degree of Protection
IP65
Features
Complete unit
Ambient temperature
-25 - +70 °C
Snap-action contact
Yes
Description
Not to be used as a safety position switch
Approval
Contacts
N/O = Normally open
1 N/O
N/C = Normally closed
1 NC
Contact sequence
Contact travel■ = Contact closed□ = Contact open
Colour
Enclosure covers
Grey
Enclosure covers
Housing
Insulated material
Connection type
Screw terminal
Rod length
130 mm
Notes
The operating head can be rotated at 90° intervals to adapt to the specified approach direction.
For degree of protection IP65, use V-M20 (206910) cable glands with connecting thread of max. 9 mm length.
For degree of protection IP65, use V-M20 (206910) cable glands with connecting thread of max. 9 mm length.
Technical data
General
Standards
IEC/EN 60947
Climatic proofing
Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30
Ambient temperature
-25 - +70 °C
Mounting position
As required
Degree of Protection
IP65
Terminal capacitiesSolid
1 x (0.75 - 2.5)
2 x (0.75 - 1.5) mm2
2 x (0.75 - 1.5) mm2
Terminal capacitiesFlexible with ferrule
1 x (0.5 - 1.5)
2 x (0.5 - 1.5) mm2
2 x (0.5 - 1.5) mm2
Repetition accuracy
0.02 mm
Contacts/switching capacity
Rated impulse withstand voltage [Uimp]
6000 V AC
Rated insulation voltage [Ui]
500 V
Overvoltage category/pollution degree
III/3
Rated operational current [Ie]AC-1524 V [Ie]
10 A
Rated operational current [Ie]AC-15220 V 230 V 240 V [Ie]
6 A
Rated operational current [Ie]AC-15380 V 400 V 415 V [Ie]
4 A
Rated operational current [Ie]DC-1324 V [Ie]
10 A
Rated operational current [Ie]DC-13110 V [Ie]
1 A
Rated operational current [Ie]DC-13220 V [Ie]
0.5 A
Supply frequency
max. 400 Hz
Short-circuit rating to IEC/EN 60947-5-1max. fuse
6 A gG/gL
Mechanical variables
Lifespan, mechanical [Operations]
8 x 106
Contact temperature of roller head
≦ 100 °C
Mechanical shock resistance (half-sinusoidal shock, 20 ms)Standard-action contact
5 g
Mechanical shock resistance (half-sinusoidal shock, 20 ms)Snap-action contact
2 g
Operating frequency [Operations/h]
≦ 6000
Actuation
MechanicalActuating force at beginning/end of stroke
8.0/20.0 N
MechanicalActuating torque of rotary drives
0.3 Nm
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
6 A
Heat dissipation per pole, current-dependent [Pvid]
0.1 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+70 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Sensors (EG000026) / End switch (EC000030)
Electric engineering, automation, process control engineering / Binary sensor technology, safety-related sensor technology / Position switch / Position switch (Type 1) ([email protected] [AGZ382015])
Width sensor
56 mm
Diameter sensor
0 mm
Height of sensor
83 mm
Length of sensor
0 mm
Rated operation current Ie at AC-15, 24 V
6 A
Rated operation current Ie at AC-15, 125 V
0 A
Rated operation current Ie at AC-15, 230 V
6 A
Rated operation current Ie at DC-13, 24 V
10 A
Rated operation current Ie at DC-13, 125 V
1 A
Rated operation current Ie at DC-13, 230 V
0.5 A
Switching function
Quick-break switch
Switching function latching
No
Output electronic
No
Forced opening
Yes
Number of safety auxiliary contacts
1
Number of contacts as normally closed contact
1
Number of contacts as normally open contact
1
Number of contacts as change-over contact
0
Type of interface
None
Type of interface for safety communication
None
Construction type housing
Cuboid
Material housing
Plastic
Coating housing
Other
Type of control element
Actuating rod
Alignment of the control element
Other
Type of electric connection
Other
With status indication
No
Suitable for safety functions
Yes
Explosion safety category for gas
None
Explosion safety category for dust
None
Ambient temperature during operating
25 - 70 °C
Degree of protection (IP)
IP65
Degree of protection (NEMA)
Other
Approvals
Product Standards
UL 508; CSA-C22.2 No. 14; IEC/EN 60947-4-1; CE marking
UL File No.
E29184
UL Category Control No.
NKCR
CSA File No.
12528
CSA Class No.
3211-03
North America Certification
UL listed, CSA certified
Specially designed for North America
No
Suitable for
Branch circuits
Max. Voltage Rating
600 V AC
Degree of Protection
UL: 1, 4X; CSA: 1, 3R, 4, 4X, 12, 13
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| AT4/11-S/IA/F2 - 009992 EN_009992.pdf | 216 Kbytes |
 |
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.