Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
KST34-150 074520 EATON ELECTRIC Panel enclosure, with gland plate and cable glands, HxWxD 375x250x175mm
KST34-150
074520
EATON-MOELLER
Panel enclosure, with gland plate and cable glands, HxWxD=375x250x175mm
Distribution boards > Empty cabinet
Insulating Enclosures
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
More info
▲EL-Nummer (Norway)
2502292
Panel enclosure, with gland plate and cable glands, HxWxD=375x250x175mm
Distribution board basic enclosure with fitted cable glands, material characteristic polycarbonate, impact-resistant, degree of protection IP65, patented cover fasteners with integrated overpressure compensation, enclosure side plates closed, full-area knockout, walls open at bottom or top, cables can be inserted from the front through partitioned gland plates, sealable cover fasteners, RAL 7035, grey (base), transparent smoky, (cover), mounting depth with mounting plate=150mm, cover type: transparent smoky, base type: top open bottom cable glands
Delivery program
Product range
xEnergy Safety Ci
Basic function
Basic enclosures
Product function
Panel enclosure with gland plates fitted
Single unit/Complete unit
Stand-alone device
Standards
EN 62208
EN 61439-2
EN 61439-2
Degree of Protection
IP65
Description
Sealable cover fasteners
Sides closed, but with full area knockout
Open top
Fitting of cable supports in the distribution board with wedge-lock fastener
Gland plate can be split, cables can be inserted from the front
Sides closed, but with full area knockout
Open top
Fitting of cable supports in the distribution board with wedge-lock fastener
Gland plate can be split, cables can be inserted from the front
Colour
RAL 7035, light gray (base)
Transparent, smoky gray (cover)
Transparent, smoky gray (cover)
Width
250 mm
Height
375 mm
Depth
175 mm
Mounting depth with mounting plate
150 mm
Mounting depth for mounting rail 7.5 mm height
142.5 mm
Mounting depth for mounting rail 15 mm height
135 mm
Dimensions
Enclosure depth
Legend for the graphic
Dimensions from top:
Mounting depth with mounting plate
Mounting depth for mounting rail 7.5 mm height
Mounting depth for mounting rail 15 mm height
Enclosure depth
Mounting depth with mounting plate
Mounting depth for mounting rail 7.5 mm height
Mounting depth for mounting rail 15 mm height
Enclosure depth
Enclosure depth
Cable entry
2 x 14 - 54
Technical data
General
Standards
EN 62208
EN 61439-2
EN 61439-2
Ambient temperature
-40 - +80 °C
Ambient temperatureMean value over 24 hours
35 °C
Ambient temperatureLimit valuesAmbient temperature limit value min.
-5 °C
Ambient temperatureLimit valuesAmbient air temperature, limit values max.
40 °C
Degree of Protection
IP65
Protection type
IP65 (Enclosure)
IP65 (KST cable entries from below)
IP64 (KST cable entries from above)
IP00 (Cable entry open)
IP65 (KST cable entries from below)
IP64 (KST cable entries from above)
IP00 (Cable entry open)
Components
Switchgear assembly components are type-tested. They are available individually for the self-assembly of switchgear installations, distribution boards and control panels.
Devices that can be fitted
The reference values indicated in the table apply to the basic elements of the distribution board. As far as devices, terminals etc. fitted into the enclosures are concerned, their own specific technical data and rated values apply.
StandardsTTA - Type Tested Assemblies
IEC/EN 60439-1, VDE 0660 Part 500
StandardsLow-voltage fuses
IEC/EN 60269, VDE 0636
StandardsType test
VDE 0660 Part 500, IEC/EN 60439-1
StandardsCreepage and clearance distances
III/3 to IEC/EN 60439-1
StandardsFlammability characteristics - Glow rod test
VDE 0304 Part 3 level IIb, level IIb to IEC 60707
StandardsRegulation for the fire resistance tests of electrical products, their modules and components, glow wire test
VDE 0471 Part 2
Operating and ambient conditions to VDE 0660 Part 500Ambient temperatureMean value over 24 hours
35 °C
Operating and ambient conditions to VDE 0660 Part 500Ambient temperatureLimit values
-5…40 °C
Operating and ambient conditions to VDE 0660 Part 500Indoor installationRelative humidity
90 % (at 20°C)
50% (at 40°C)
50% (at 40°C)
Operating and ambient conditions to VDE 0660 Part 500Indoor installationAltitude
Max. 2000 m
Operating and ambient conditions to VDE 0660 Part 500Protection type
IP65 (Enclosure)
IP65 (KST cable entries from below)
IP64 (KST cable entries from above)
IP00 (Cable entry open)
IP65 (KST cable entries from below)
IP64 (KST cable entries from above)
IP00 (Cable entry open)
Operating and ambient conditions to VDE 0660 Part 500Mounting grid
25 (DIN 43660) mm
Operating and ambient conditions to VDE 0660 Part 500Surface finish
Galvanized
Passivated
Passivated
Material characteristics
Surface finish
Galvanized
Passivated
Passivated
Design verification as per IEC/EN 61439
Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
20 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
19 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
17 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
41 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
38 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
34 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Lower part: 960 °C / cover: 850 °C; meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2 Strength of materials and parts10.2.5 Lifting
10 kg per enclosure with support frame and lifting aid met; assembled and secured as per the latest applicable instruction leaflet.
10.2 Strength of materials and parts10.2.6 Mechanical impact
IK10
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
IP65
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Ui= 1000 V AC
10.9 Insulation properties10.9.3 Impulse withstand voltage
8 kV
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Meets the product standard's requirements.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.
Technical data ETIM 7.0
Distribution boards (EG000023) / Empty cabinet (EC000058)
Electric engineering, automation, process control engineering / Electrical installation, device / Electrical distribution system (incl. small distribution board) / Empty cabinet (small distribution board) ([email protected] [ACN385011])
Mounting method
Surface mounted (plaster)
Type of cover
Cover
Cover model
Closed
Type of door
None
Transparent cover/door
Yes
With lock
No
Nominal current (In)
1600 A
Height
375 mm
Width
250 mm
Depth
175 mm
Built-in depth
150 mm
Internal depth
150 mm
Plate thickness cabinet
6 mm
Plate thickness door/cover
6 mm
Colour
Grey
RAL-number
7035
Number of modules
1
Number of rows
0
Width in number of modular spacings
9
Number of openings for flange plates
3
Extension possible
Yes
Number of conduit inlets
60
Material housing
Plastic
Surface protection
Other
With mounting plate
No
Suitable for outdoor use
Yes
Suitable for lightning protection
Yes
Degree of protection (IP)
IP65
Degree of protection (NEMA)
Other
Protection class
II
Impact strength
IK10
Circuit integrity
Other
Dimensions
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| KST34-150 074520 EN_074520.pdf | 265 Kbytes |
 |
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.