Product name
Eaton xComfort KLV multimedia distribution board
Product Length/Depth
100 millimetre
Product height
715 millimetre
Product width
360 millimetre
Product weight
6.5 kilogram
Certifications
IEC/EN 60670-24 (GP)
IEC/EN 62208
Product Tradename
xComfort KLV
Product Type
Multimedia distribution board
Type
Basic deviceInstallation distribution boardKLV multimedia
Model
Distributor enclosure
Application
Indoor (installation site)
Color
White
Traffic white (RAL 9016)
Technical Data - Electrical
Frequency rating of contacts
50 Hz
Technical Data - Mechanical
Mounting method
Hollow-wall mounting
Flush mounted (plaster)
DIN-compatible
Hollow wall
Material
Sheet steel, powder-coated
Polystyren (plastic)
Steel plate/plastic
Degree of protection
IP30
IK05 (impact resistance)
NEMA Other
Number of cores (dual) - max
12
Number of module space units per row
12
Number of mountable connection strips
12
Terminal type
Without terminals
Module rack type
Media mounting plate
Protective shrouding material
Without shroud for protection against accidental contact
Temperature-rise verification as per IEC 60890
Heat diss. ambient 35°C delta T:20°C flush mount individ. encl. top(IEC 60890)
24 W
Design verification as per IEC/EN 61439 - technical data
Ambient operating temperature details
-5 °C - 40 °C
Design verification as per IEC/EN 61439
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
850 °C; meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2.5 Lifting
Does not apply to enclosures without lifting aids.
10.2.6 Mechanical impact
IK05
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
IP30
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Ui = 400 V AC
10.9.3 Impulse withstand voltage
4 kV
10.9.4 Testing of enclosures made of insulating material
Meets the product standard's requirements.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.
Fitted with:
Cable retainer
Door/Frame
Hollow-wall anchor
3D adjustment element for mounting designed to adjust the mounting depth by up to 18 mm
Wall trough
Spirit level for leveling
Installation instructions
Device support rails
Microperforated mounting plate
2x single-way socket outlet
Device holder
Protection class
II (totally insulated)
Special features
IP30Protection Class IIPlastic enclosure with sheet steel door, white (RAL 9016)Note: To obtain protection class II, all devices installed on the mounting plate must be of the fully insulated type.
Used with
Installation distribution board
Basic device
KLV multimedia