Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
XNE-8AI-U/I-4PT/NI 140037 XN-322-4AI-PTNI EATON ELECTRIC Analog input card XI/ON ECO, 24 V DC, 8AI(voltage, ..
XNE-8AI-U/I-4PT/NI
140037
XN-322-4AI-PTNI
EATON-MOELLER
Analog input card XI/ON ECO, 24 V DC, 8AI(voltage, current)/4(PT, ni, R)
XNE-8AI-U/I-4PT/NI
PLC's > Fieldbus, decentr. periphery - analogue I/O module
Remote I / O Modules XION
* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER
Often bought together
▲More info
▲EL-Nummer (Norway)
0004520016
Analog input card XI/ON ECO, 24 V DC, 8AI(voltage, current)/4(PT, ni, R)
The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.
Delivery program
Function
XI/ON I/O modules
Function
XNE Slice module
Short Description
8 Analog input U/I or 4 Analog inputs PT/NI
-10/0 to +10 V DC
0/4 to 20 mA
Acquisition of normalized signals for temperature measurement
Connection of sensor types Pt100, Pt200, Pt500, Pt1000 and Ni100, Ni1000, NI1000TK5000 in 2- or 3-wire circuit
-10/0 to +10 V DC
0/4 to 20 mA
Acquisition of normalized signals for temperature measurement
Connection of sensor types Pt100, Pt200, Pt500, Pt1000 and Ni100, Ni1000, NI1000TK5000 in 2- or 3-wire circuit
Technical data
General
Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperatureAmbient temperature, operation
0 - +55 °C
Ambient temperatureStorage, transport [ϑ]
-25 - +85 °C
Relative humidityRelative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanicalDegree of Protection
IP20
Ambient conditions, mechanicalHarmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Approvals
CE, cULus
EAC
EAC
Other technical data (sheet catalogue)
Terminations
Rated data
according to VDE 0611 Part 1/8.92 /
IEC/EN 60947-7-1
IEC/EN 60947-7-1
Connection design in TOP direction
Push-In spring-cage terminals
Stripping length
8 mm
Clamping range
max. 0.14 - 1.5 mm2
Connectable conductors"e" solid H07V-U
0.25 - 1.5 mm2
Connectable conductors"f" flexible H 07V-K
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 0.75 mm2
Connectable conductors"e" solid H07V-U
0.25 - 1.5 mm2
Connectable conductors"f" flexible H 07V-K
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 0.75 mm2
Gauge pin IEC/EN 60947-1
A1
Analog input modules
Measured variables
Voltage, current, temperature (PT, NI), resistance R
Channels
8 (U/I), 4 (PT/NI/R) Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Heat dissipation
< 1.5 W
Input current
0/4 - 20 mA
Maximum input current
40 (Max. input voltage: < 17 V) mA
Input voltage
-10/0 to +10 V DC
Maximum input voltage
± 20 V DC
Input impedance
< 62 Ω/≧ 200 kΩ
Limit frequency (-3 db)
1.5 Hz
Offset error
0.1 %
Basic error limit at 23 °C
0.2 %
Temperature coefficient
200 ppm/°C of full-scale value
Measured value representation
16-bit signed integer
12-bit full range, flush left
Standard/extended range/PA (NE43)
12-bit full range, flush left
Standard/extended range/PA (NE43)
Connectable sensors
Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Temperature range
Pt: -200 - +850 (-328 - +1562)/-200 - +150 (-328 - +302)
Ni: -60 - +250 (-76 - +482)/-60 - +150 (-76 - +302) °C, (°F)
Ni: -60 - +250 (-76 - +482)/-60 - +150 (-76 - +302) °C, (°F)
Diagnostics
Yes
Base moduleswithout C connection
Already built in
Analog output modules
Measured variables
Voltage, current, temperature (PT, NI), resistance R
Channels
8 (U/I), 4 (PT/NI/R) Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Heat dissipation
< 1.5 W
Offset error
0.1 %
Basic error limit at 23 °C
0.2 %
Temperature coefficient
200 ppm/°C of full-scale value
Measured value representation
16-bit signed integer
12-bit full range, flush left
Standard/extended range/PA (NE43)
12-bit full range, flush left
Standard/extended range/PA (NE43)
Base moduleswithout C connection
Already built in
Digital outputs
Channels
8 (U/I), 4 (PT/NI/R) Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from the supply terminal (at load current = 0 mA) [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Can be connected
Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Diagnostics
Yes
Digital inputs
Channels
8 (U/I), 4 (PT/NI/R) Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Heat dissipation
< 1.5 W
Base moduleswithout C connection
Already built in
Relay modules
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Can be connected
Platinum sensors: Pt100, Pt500, Pt1000 (as per IEC 751)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Nickel sensors: Ni100, Ni1000 (as per DIN 43760)
Base moduleswithout C connection
Already built in
Power supply module
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Counter module
Channels
8 (U/I), 4 (PT/NI/R) Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Heat dissipation
< 1.5 W
Measuring modes
Temperature coefficient
200 ppm/°C of full-scale value
Interfaces
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
35 mA
Rated current consumption from module bus [IMB]
≦ 30 mA
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
1.5 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
PLC's (EG000024) / Fieldbus, decentr. periphery - analogue I/O module (EC001596)
Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - analogue I/O module ([email protected] [BAA061014])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
20.4 - 28.8 V
Voltage type of supply voltage
DC
Input, current
Yes
Input, voltage
Yes
Input, resistor
Yes
Input, resistance thermometer
No
Input, thermocouple
No
Input signal, configurable
Yes
Resolution of the analogue inputs
16 Bit
Output, current
No
Output, voltage
No
Output signal configurable
No
Resolution of the analogue outputs
0 Bit
Number of analogue inputs
8
Number of analogue outputs
0
Analogue inputs configurable
Yes
Analogue outputs configurable
Yes
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces USB
0
Number of HW-interfaces other
1
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for MODBUS
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
No
Radio standard Bluetooth
No
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
System accessory
Yes
Degree of protection (IP)
IP20
Degree of protection (NEMA)
Type of electric connection
Screw-/spring clamp connection
Fieldbus connection over separate bus coupler possible
Yes
Rail mounting possible
Yes
Wall mounting/direct mounting
No
Front build in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
Category according to EN 954-1
SIL according to IEC 61508
None
Performance level acc. EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
13 mm
Height
161.5 mm
Depth
74.5 mm
Approvals
Product Standards
IEC/EN 6113-2; CE marking
North America Certification
Request filed for UL and CSA
Specially designed for North America
No
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC: IP20, UL/CSA Type: -
Dimensions
Link to sheet catalogue
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| XNE-8AI-U/I-4PT/NI XN-322-4AI-PTNI 140037 EN_140037.pdf | 189 Kbytes |
 |
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.