Danfoss dual pressure switch type KP 44 is designed for use as a pump guard to control and protect supply water pumps. It combines the functions of a pressure switch and a flow monitoring device. The lefthand pressure bellows control the pump pressure. The righthand bellows cut out the pump if the suction pressure is too low. In this way the pump is protected from running dry and consequent bearing damage. Wide regulation range For pumps or compressors Small dimensions; space saving & easy to install Ultra-short bounce times: Limit wear to a minimum and increases reliability Electrical connection from front of unit makes rack mounting easier and saves space Suitable for both ac and dc power Cable entry for 6-14 mm (diameter) cables Screwed cable entry (standards Pg 13.5 & 16) makes rewiring easy Efficient protection of water pumps in case of water supply fails
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.