No products
Product successfully added to your shopping cart
View larger
B-FL75 2598861 CEMBRE B-FL75 PUNCHING TOOL
B-FL75
2598861
CEMBRE
B-FL75 PUNCHING TOOL
TOOLS > Hydraulic tools
* Brand new product in its original packaging covered by the warranties and certifications provided by CEMBRE
More info
▲general features
Next generation of 18.0 V cordless hydraulic tool specifically designed for hole punching stainless Steel, mild Steel, fibreglass and plastic sheet materials up to 3,5 mm thickness.
New Li-Ion 18 V 4 Ah batteries offer a higher capacity than 14.4 V 3 Ah, while greater punch speed and punching force result from a revitalised hydraulic system with double speed action. The battery is equipped with LED indicators to show the remaining battery life at any time by pressing the adjacent button.
The balanced punching head pivots 180deg through a full 360deg rotation for ease of use in confined spaces. Fitted with a maximum hydraulic pressure valve.
Designed with improved balance, B-FL750 is easily manageable during the punching process and, by the use of bi-component plastics, has a shell with high resistance to wear and damage.
Rubber grip inserts, low noise and minimal vibration aid operator comfort while additional convenience and safety are provided by LED lighting of the working area.
Operating temperature: -15 to +50 ° C
The tool is supplied as:
- Basic tool with battery and shoulder strap
- Spare battery
- Battery charger
- Puller TD-11
- Puller TD-19
- Spiral bit Ø 11,5 mm
- Plastic carrying case
PUNCHING ACCESSORIES AVAILABLE
| ROUND PUNCH | |||||||||
| Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||||||
| Nominal | Pg | ISO | GAS | Stainless Steel | Mild Steel | KIT (Punch + Die) | Puller | ||
| Ø (mm) | Ø (inch) | (mm) | |||||||
| 15,5 | .610 | Pg9 | - | - | 2,5 mm (0.1 in.) Rm= 700 N/mm2 | 3,5 mm (0.14 in.) Rm= 510 N/mm2 | 11,5 | RD15.5SS | TD-11 |
| 16,2 | .638 | - | ISO-16 | - | RD16.2SS | ||||
| 17 | .669 | - | - | G3/8” | RD17SS | ||||
| 17,5 | .689 | - | - | - | RD17.5SS | ||||
| 18,8 | .740 | Pg11 | - | - | RD18.8SS | ||||
| 19,1 | .752 | - | - | - | RD19.1SS | ||||
| 20,5 | .807 | Pg 13,5 | ISO-20 | - | RD20.5SS | ||||
| 21,5 | .846 | - | - | G1/2" | RD21.5SS | ||||
| 22,6 | .890 | Pg16 | - | - | RD22.6SS | ||||
| 23,8 | .937 | - | - | G5/8” | RD23.8SS | ||||
| 25,4 | 1.000 | - | ISO-25 | - | RD25.4SS | ||||
| 27 | 1.063 | - | - | G3/4” | RD27SS | ||||
| 28,5 | 1.122 | Pg21 | - | - | RD28.5SS | ||||
| 30,5 | 1.201 | - | - | G7/8” | RD30.5SS | ||||
| 28,5 | 1.122 | Pg 21 | - | - | 20 | RD28.5SS-19 | TD-19 | ||
| 30,5 | 1.201 | - | - | G7/8” | RD30.5SS-19 | ||||
| 31,8 | 1.252 | - | - | - | RD31.8SS | ||||
| 32,5 | 1.279 | - | ISO-32 | - | RD32.5SS | ||||
| 34 | 1.338 | - | - | G1" | RD34SS | ||||
| 34,6 | 1.362 | - | - | - | RD34.6SS | ||||
| 37,2 | 1.464 | Pg29 | - | - | RD37.2SS | ||||
| 38,1 | 1.500 | - | - | - | RD38.1SS | ||||
| 38,5 | 1.515 | - | - | G1"1/8" | RD38.5SS | ||||
| 40,5 | 1.594 | - | ISO-40 | - | RD40.5SS | ||||
| 41,3 | 1.626 | - | - | - | RD41.3SS | ||||
| 42,5 | 1.673 | - | - | G1”1/4” | RD42.5SS | ||||
| 43,2 | 1.701 | - | - | - | RD43.2SS | ||||
| 44,5 | 1.752 | - | - | - | RD44.5SS | ||||
| 47,2 | 1.858 | Pg36 | - | - | RD47.2SS | ||||
| 48,5 | 1.909 | - | - | G1”1/2” | RD48.5SS | ||||
| 50,5 | 1.988 | - | ISO-50 | - | RD50.5SS | ||||
| 51,4 | 2.023 | - | - | - | RD51.4SS | ||||
| 52,4 | 2.063 | - | - | - | RD52.4SS | ||||
| 54,2 | 2.134 | Pg42 | - | G1”3/4” | RD54.2SS | ||||
| 60 | 2.362 | Pg48 | - | G2” | RD60SS | ||||
| 60,5 | 2.381 | - | - | - | RD60.5SS | ||||
| 64 | 2.520 | - | ISO-63 | - | RD64SS | ||||
| 65 | 2.559 | - | - | - | RD65SS | ||||
| 76 | 2.992 | - | - | G2”1/2” | 3 | RD76SS | |||
| 76,5 | 3.011 | - | - | - | 3,5 | RD76.5SS | |||
| 80,5 | 3.169 | - | - | - | 3 | RD80.5SS | |||
| 89 | 3.503 | - | - | G3" | 3,5 | RD89SS | |||
| 90 | 3.543 | - | - | - | 2 | 3 | RD90SS | ||
| 100 | 3.937 | - | - | - | 2 | 3 | 29 | RD100SS | TD-28.5* |
| 102 | 4.015 | - | - | - | 2 | 3 | RD102SS | ||
| 114 | 4.488 | - | - | - | 2 | 2,5 | RD114SS | ||
| 120 | 4.724 | - | - | - | 1,5 | 2 | RD120SS | ||
| 140 | 5.512 | - | - | - | 1,5 | 2 | RD140SS | ||
* Puller included in the kit
| SQUARE PUNCH | |||||
| Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||
| Nominal | Stainless Steel | Mild Steel | KIT (Punch + Die + Puller) | ||
| Ø (mm) | Ø (inch) | (mm) | |||
| 21,0 x 21,0 | .827 x .827 | 2,5 | 3,5 | 12 | RD21X21 |
| 46,0 x 46,0 | 1.811 x 1.811 | 1,5 | 2 | 26,5 | RD46X46 |
| 68,0 x 68,0 | 2.677 x 2.677 | 22,5 | RD68X68 | ||
| 92,0 x 92,0 | 3.622 x 3.622 | RD92X92 | |||
| 126,0 x 126,0 | 4.960 x 4.960 | 28,5 | RD126X126 | ||
| 138,0 x 138,0 | 5.433 x 5.433 | 1 | 1,5 | RD138X138 | |
| 220,0 x 220,0 | 8.661 x 8.661 | RD220X220 | |||
| RECTANGULAR PUNCH | |||||
| Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||
| Nominal | Stainless Steel | Mild Steel | KIT (Punch + Die + Puller) | ||
| Ø (mm) | Ø (inch) | (mm) | |||
| 18,0 x 46,0 | .709 x 1.811 | 2 | 2 | 16,5 | RD18X46 |
| 22,0 x 30,0 | .866 x 1.181 | RD22X30 | |||
| 22,0 x 46,0 | .866 x 1.811 | RD22X46 | |||
| 35,0 x 86,0 | 1.377 x 3.385 | RD35X86 | |||
| 35,0 x 112,0 | 1.377 x 4.409 | RD35X112 | |||
| 36,0 x 46,0 | 1.417 x 1.811 | 23,8 | RD36X46 | ||
| 37,0 x 54,0 | 1.456 x 2.125 | 1,5 | 16,5 | RD37X54 | |
| 37,0 x 67,0 | 1.456 x 2.637 | RD37X67 | |||
| 37,0 x 88,0 | 1.456 x 3.464 | 26,5 | RD37X88 | ||
| 37,0 x 104,0 | 1.456 x 4.094 | RD37X104 | |||
| 37,0 x 115,0 | 1.456 x 4.527 | RD37X115 | |||
| 46,0 x 54,0 | 1.811 x 2.126 | RD46X54 | |||
| 46,0 x 72,0 | 1.811 x 2.835 | RD46X72 | |||
| 46,0 x 107,0 | 1.811 x 4.212 | RD46X107 | |||
| 50,0 x 98,0 | 1.968 x 3.858 | RD50X98 | |||
| 67,0 x 126,0 | 2.637 x 4.960 | 28,5 | RD67X126 | ||
| "D" PUNCH | |||||
| Hole Diameter | Material max thickness (mm) | Pilot hole Ø | Type | ||
| Nominal | Stainless Steel | Mild Steel | KIT (Punch + Die + Puller) | ||
| Ø (mm) | Ø (inch) | (mm) | |||
| (a)38,3 x (b)36,6 | (a)1.507 x (b)1.442 | 2,5 | 3,5 | 18,5 | RD18D |
| (a)43,1 x (b)41,5 | (a)1.696 x (b)1.632 | RD24D | |||
Acciaio inox = Rm= 700 N/mm2 - Acciao dolce = Rm= 500 N/mm2
| USE OF NON-CEMBRE PUNCHING ACCESSORIES | ||
| Type | Punch & Die | Pilot Hole Ø mm |
| TRD-9,4C (*) | KLAUKE, GREENLEE 3/8" - 24 UNF | Ø 9.7 |
| TRD-M11C (*) | IMB, BM, COSMEC (M11x1.5) | Ø 11.5 |
| TD-M16C | IMB, BM, COSMEC (M16x1.5) | Ø 16.5 o RD17.5SS |
| TD27 | COSMEC (Ø105÷Ø140) | Ø 27.5 |
| TD14X14-M14 | COSMEC 46x46 | Ø 18.8 |
| TD120X20-M20 | COSMEC 92x92 | Ø 27.5 |
| TD20X20-M20 | BM, COSMEC 42x95 | Ø 27.5 |
| TGD-13.5X13.5-M13 | COSMEC 40x40; 45x45; 46x46 | Ø 18.8 |
| TGD-10X10-M9 | COSMEC 006505 | Ø 13.8 |
(*) the washer supplied with the KIT must be threaded onto the draw stud and positioned between the head and the die to allow the die to rest correctly
Technical characteristics Other characteristics
| Properties | |
|---|---|
| Type of action | Hole punching |
| Maximum diameter pierceable | 140 mm |
| Battery material | Li-Ion |
| Battery voltage | 18 V |
| Battery current | 4 Ah |
| Length | 363 mm |
| Height | 366 mm |
| Width | 83 mm |
| Weight | 5.1 kg |
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| B-FL75 PUNCHING TOOL - CEMBRE - B-FL75 - 2598861 | 376 Kbytes |
 |
| B-FL75 PUNCHING TOOL - CEMBRE - B-FL75 - 2598861 | 30 Mbytes |
|
| B-FL75 PUNCHING TOOL - CEMBRE - B-FL75 - 2598861 | 375 Kbytes |
|
| B-FL75 PUNCHING TOOL - CEMBRE - B-FL75 - 2598861 | 28 Mbytes |
|
| Download general catalog |
|
Reviews (0) ▲
No customer reviews for the moment.
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.