SH2WBU230 CARLO GAVAZZI Selected parameters TYPE Wireless HOUSING DIN-rail POWER SUPPLY 24 to 230 Vac/dc Oth..

Smart Dupline® Wireless Base Unit Type SH2WBU230
• WiDup, a wirelesscommunication protocol, generator for home automation application
• Wireless transmission based on IEEE 802.15.4,
@ 2.4 GHz
• Maximumslave number: 250
• Up to 7 SH2WBU230 can be connected on the same network
• Connection to SH2WEB24 via internal bus or terminals via the high speed bus.
• Dimension:2-DIN module
Product Description
Ordering Key
SH 2 WBU 230
The wireless base unit SH2WBU230 generates the wireless networkperforming the functions of a wireless access point and router.
The generated protocol is called WiDup and it is based on the standard IEEE
802.15.4 at 2.4 GHz.
It is part of the smart-house system and it has to be used together with the controller SH2WEB24.
Each SH2WEB24 can be connectedtoupto7 sub-
mastergenerators (the sum of SH2MCG24 and SH2WBU230 is 7) in order to have up to 7 wired/wireless networks.
All the devices are connected via an internal bus if they are in the same cabinet,orvia terminals if they are mounted on different cabinets.
EachSH2WBU230must have an address that has to beprogrammed usingthe SH tool.
smart-house
2-DIN housing Wireless base unit Power supply
Type Selection
Housing MountingSupply: 24 to 240 VAC/DC
2 DIN DIN-rail SH2WBU230
Supply Specifications
Power supplyOvervoltage cat. II
(IEC 60664-1, par. 4.3.3.2) Rated operational voltage 24 to 240 Vac/dc
Rated impulse voltage 2.5kV
Rated operational power 2.4W
Connection 6 x 6 mm2
Power on delay Typ. 2 s
General Specifications
Installation category Cat. II
Dielectric strength
Power supply to HS bus® 500V AC for 1 minute
(IEC 60664-1, Tab. A.1)
Fail-safe conditionIf the SH2WBU230 loses the communication with the SH2WEB24, the WiDup Net- work will be switched off.
In this situation all the modules connected tothenetwork will go into the fail-safe output status individually programmed with the SH tool.
Environment
Degree of protection
Front IP 50
Screw terminal IP 20
Pollution degree 2 (IEC 60664-1, par. 4.6.2) Operating temperature -20° to +50°C (-4° to 122°F) Storage temperature -50° to +85°C (-58° to 185°F) Humidity (non-condensing) 20 to 80% RH
LED’s indication
BUS LED1 yellow
ON1 green, Power LED WiDup LED 1 blue
Connection
Terminal8 Screw-type
Specifications are subject to change without notice (17.12.2013) 1