Selected parameters TYPE Wireless HOUSING Decentral POWER SUPPLY Bus-powered Others TYPE Relay module with energy reading HOUSING 42 x 42 x 25 mm POWER SUPPLY 115 to 240 VAC MAIN CHARACTERISTICS Single relay 16A/230V with energy reading
Smart Dupline® Wireless Relay Output module Type SHDWRE16AE230 • Wireless relay output module for buildingautomation application • Designed to fit into the eurobox • Power supply 230 VAC • Wireless transmission based on IEE802.15.4 @ 2.4 GHz • Programmable routing function • Load: 16A / 250VAC • Withstands 130A inrush current • Energy measurement: kWh • Instantaneous variablesreadout: current, voltage, power Product Description Ordering Key SH D W RE 16A E 230 The SHDWRE16AE230 is a wireless module with a sin- gle relay outputand energy measurement. Single phase variables: VLn, A, W. Energy measurements: total kWh. The measured values are then logged in the SH2WEB24. It is part of the smart-house concept and canbeusedwithallthe functions supported by the smart-house controller. When an activation radio command is received, the outputturnsOn and remains On until a deactiva- tion radio command is recieved. It must always be coupled to an SH2WBU230 module. Smart-house Decentral module Wireless Relay Resistive load Energy measurement Power supply Type Selection Relay max. Load Relay Output Supply: 115 to 240 VAC 16A 1 SPST relay SHDWRE16AE230 Output Specifications Output1 SPST relay Contact ratings (AgSnO2)µ (micro gap) Resistive loadAC 1 16 A/250 VAC Minimum load 100mA/12 V (recommended) LifetimeSee table to the right Operating frequency ≤60 operations/minute Max. DC load breaking capacity Relay Data VAC Load Typ. N. of Operations 250 V, 12A, cos j=11.0 x 105 250 V,8A, cos j=13.5 x 105 250 V,4A, cos j=15.0 x 105 250 V,3A, cos j=17.5 x 105 230 V, 550 W filament lamps lin ≤ 40 Apeak Ioff = 2.5 A 2.0 x 105 300 200 100 50 40 30 20 10 resistive load 0,1 0,20,51 2 510 20 DC current (A) 230 V, 1000 W filament lamps lin ≤ 71.5 Apeak Ioff = 4.5 A 7.0 x 104 230 V, 900 W fluorescent tubes (25 x 36W) parallel compensated, 30 µF 1.0 x 104 230 V, compressor lin ≤ 21 Apeak Ioff = 3.5 A cos j = 0.51.7 x 105 250V, 8A, cos j = 0.31.0 x 105 Specifications are subject to change without notice (20.01.2015) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.