Selected parameters SYSTEM DIN-rail Mount CURRENT RATING CATEGORY 26 - 50 AAC RATED VOLTAGE 120 VAC OUTPUT SWITCHING MODE Full cycle control NUMBER OF POLES 1 CONTROL DC - ANALOGUE POWER CONNECTION Captive Clamp MODEL Solid State Contactor Others CURRENT RATING 30 AAC CONTROL INPUT 4…20 mA PRODUCT WIDTH 90mm
Solid State Relays Analog Full CycleSwitching TypeRN.F • AC solid state relay, 1- and 2-poles • Analog switching for resistive loads (heating) • 4-20 mA or 0-10 V controls • Rated operational current: 1-pole : 30A and 50A 2-pole : 2 x15A and 2 x 25A • Rated operational voltage up to 480 VAC • LED-indication for normal operation and alarm status • IP 20 protection • DIN-rail mountable Product Description Ordering Key RN 1 F 40 V 30 The analog switching relay pro- vides a number of full cycles, evenly distributed over a fixed period, depending of the con- trol input. The input of 4-20 mA or 0-10 VDC respectively, correspondstozero and full output within a period of 1.28 s @ 50 Hz (1.07 s @ 60 Hz). This principle makes the transfer characteristics fully linear. The principle operates with zero switching, thus ensuring a reduced level of radiated and wire conducted noise. The 2- pole type has alarm LED indi- cation by loss of master phase. The analogue Full Cycle Switching is not recom- mended for light control due to light-flickering. Solid State Relay Number of poles Switching type Rated operational voltage Control signal Rated operational current TypeSelection, 1-Pole Rated ControlControlRated operational current operational voltage inputsupply 30 A 50 A 120 VAC4-20 mARN 1F12I30 RN 1F12I50 0-10 VDC12-32 VDC, 24 VAC RN 1F12V30RN 1F12V50 230 VAC4-20 mARN 1F23I30 RN 1F23I50 0-10 VDC12-32 VDC, 24 VAC RN 1F23V30RN 1F23V50 480 VAC4-20 mARN 1F48I30 RN 1F48I50 0-10 VDC12-32 VDC, 24 VAC RN 1F48V30RN 1F48V50 TypeSelection, 2-Pole Rated ControlControlRated operational current operational voltage inputsupply 30 A Total (2 x 15A)50 A Total (2 x 25A) 120 VAC4-20 mARN 2F12I30 RN 2F12I50 0-10 VDC12-32 VDC, 24 VAC RN 2F12V30RN 2F12V50 230 VAC4-20 mARN 2F23I30 RN 2F23I50 0-10 VDC12-32 VDC, 24 VAC RN 2F23V30RN 2F23V50 480 VAC4-20 mARN 2F48I30 RN 2F48I50 0-10 VDC12-32 VDC, 24 VAC RN 2F48V30RN 2F48V50 Specifications are subject to change without notice (20.08.2012) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.