RN1F12V30 CARLO GAVAZZI Selected parameters SYSTEM DIN-rail Mount CURRENT RATING CATEGORY 26 50 AAC RATED VO..

Solid State Relays
Analog Full CycleSwitching
TypeRN.F
• AC solid state relay, 1- and 2-poles
• Analog switching for resistive loads (heating)
• 4-20 mA or 0-10 V controls
• Rated operational current: 1-pole : 30A and 50A
2-pole : 2 x15A and 2 x 25A
• Rated operational voltage up to 480 VAC
• LED-indication for normal operation and alarm status
• IP 20 protection
• DIN-rail mountable
Product Description Ordering Key RN 1 F 40 V 30
The analog switching relay pro- vides a number of full cycles, evenly distributed over a fixed period, depending of the con- trol input. The input of 4-20 mA or 0-10 VDC respectively, correspondstozero and full output within a period of 1.28 s
@ 50 Hz (1.07 s @ 60 Hz). This principle makes the transfer characteristics fully linear. The
principle operates with zero switching, thus ensuring a reduced level of radiated and wire conducted noise. The 2- pole type has alarm LED indi- cation by loss of master phase. The analogue Full Cycle Switching is not recom- mended for light control due to light-flickering.
Solid State Relay Number of poles Switching type
Rated operational voltage
Control signal
Rated operational current
TypeSelection, 1-Pole
Rated ControlControlRated operational current operational voltage inputsupply 30 A 50 A
120 VAC4-20 mARN 1F12I30 RN 1F12I50
0-10 VDC12-32 VDC, 24 VAC RN 1F12V30RN 1F12V50
230 VAC4-20 mARN 1F23I30 RN 1F23I50
0-10 VDC12-32 VDC, 24 VAC RN 1F23V30RN 1F23V50
480 VAC4-20 mARN 1F48I30 RN 1F48I50
0-10 VDC12-32 VDC, 24 VAC RN 1F48V30RN 1F48V50
TypeSelection, 2-Pole
Rated ControlControlRated operational current
operational voltage inputsupply 30 A Total (2 x 15A)50 A Total (2 x 25A)
120 VAC4-20 mARN 2F12I30 RN 2F12I50
0-10 VDC12-32 VDC, 24 VAC RN 2F12V30RN 2F12V50
230 VAC4-20 mARN 2F23I30 RN 2F23I50
0-10 VDC12-32 VDC, 24 VAC RN 2F23V30RN 2F23V50
480 VAC4-20 mARN 2F48I30 RN 2F48I50
0-10 VDC12-32 VDC, 24 VAC RN 2F48V30RN 2F48V50
Specifications are subject to change without notice (20.08.2012) 1