Selected parameters SYSTEM DIN-rail Mount CURRENT RATING CATEGORY 26 - 50 AAC RATED VOLTAGE 600 VAC OUTPUT SWITCHING MODE Zero Cross NUMBER OF POLES 3 CONTROL AC POWER CONNECTION Box Clamp MODEL Solid State Contactor with System Monitoring Others CURRENT RATING 30 AAC at 40°C (104°F) CONTROL INPUT 20-275 VAC PRODUCT WIDTH 70mm
Solid State Relays 3-Phase with IntegratedHeatsink TypesRGC2,RGC3 • 2-pole & 3-pole switching AC solid state contactors • Product width up to 70mm • Rated operational voltage: up to 660VAC • Rated operational current: up to 75AAC • Control voltages: 5-32VDC, 20-275VAC (24-190 VDC) • Up to 15,000A²s for I²t • Motor ratings up to 11 kW @ 400VAC, 25HP @ 600VAC • Integrated varistor protection on output • Optional monitoring for SSR and load malfunction (RGC..M)1 • EMR alarm output and auxiliary output (RGC..M) • Controlled fan operation for versions with integrated fan • 100kA Short Circuit Current Rating according to UL508 • DIN or panel mount 2 1: RGC..M is suitable only for resistive loads 2: Applicable only to RGC3..10 Product DescriptionOrdering Key RGC 3 A 60 D 65 G G E D F M This product is intended to replace mechanical contactors especially whenswitching is frequent. The smallest product width in the RGC2, RGC3 range is54mm (3xDIN) and goes up to 70mm. 2-pole and 3-poleswitching optionsare available. Apart from resistive and slightly inductive loads,theRGCis certified for motor switching with associated motor ratings. A green LED gives indication of control voltage presence. Fan operation is controlled for the versions which have an integrated fan. Detection ofSSRoverheat, mains loss, SSR malfunction and load loss is possible with the RGC..M versions. An EMR alarmoutputisavailable for remote signaling. An additional feature with the RGC..M is the electronic auxiliary output. The RGC..M has additional LEDs for load status and alarm status indication. Solid state relay Number of switched poles Switching mode Rated operational voltage Control voltage Rated operational current Connection type for control Connection type for power Connection configuration External supply Integrated fan Monitoring features Specifications are at a surrounding temperature of 25°C unless otherwise specified. Ordering Key(refer to page 2 for available part nos.) SSR with RatedControl Rated current/ ConnectionConnection Connection ExternalFeatures heatsinkvoltage voltage6 pole @40°C3 controlpowerconfiguration supply (Ue)5,(Uc) (Us) Blocking voltage RGC2A:22: D:25: 25AACK: Screw K: ScrewE: ContactorD: 24VDC F: Integrated fan with over 2-pole switching + 42-242VAC, 5 - 32VDC 40: 40AACG: Box ClampG: Box ClampA: 90-250VAC temperature protection (OTP) & 1-pole direct, ZC 800Vp 75: 75AAC EMR alarm output 60: A:M: Monitoring for Mains loss, 42-660VAC, 20-275VAC, Load loss, SSR short circuit, 1200Vp 24-190VDC open circuit and over- temperature with EMR alarm output and auxiliary output1 RGC3A:22: D:10: 10AACK: Screw K: ScrewE: ContactorD: 24VDC F: Integrated fan with over 3-pole switching 42-242VAC, 5 - 32VDC 20: 20AACG: Box ClampG: Box ClampA: 90-250VAC temperature protection (OTP) & ZC4 800Vp 25: 25AAC EMR alarm output 30: 30AAC 60: A:40: 40AAC M: Monitoring for Mains loss, 42-660VAC, 20-275VAC, 65: 65AAC Load loss, SSR short circuit, 1200Vp 24-190VDC open circuit and over- temperature with EMR alarm output and auxiliary output1 (suitable only for resistive loads) 3. Refer to Current Derating curves 4. ZC= Zero Cross Switching 5. Operating voltage for RGC..M starts from 90VAC 6. AC control range for RGC..A..A.. is limited to 20-275VAC only Specifications are subject to change without notice (20.03.2015) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.