RGC1FA23D30GGE CARLO GAVAZZI Selected parameters SYSTEM DIN-rail Mount CURRENT RATING CATEGORY 26 50 AAC RAT..

Solid State Relays
1-Phase with Heatsink and IntegratedFuse
TypeRGC1F
•35mm product width
•Solid state contactor with integrated fuse
•AC zero cross switching
•Operational voltage: up to 600 VAC
•Rated load currents of 20 AAC, 30 AAC and 40 AAC
•Control voltage: 4.5 - 32 VDC
•Integrated voltage transient protection with varistor
•Detection of SSR and load mulfunction (RGC1FS)
•Alarm output signal (RGC1FS)
•100 kA short circuit current rating
Product DescriptionOrdering Key
RGC 1 F A 60 D 30 GG E
This solid state contactor includes three functions in one housing: power switching, short circuit protection by semicondcutor fuse and sys- tem monitoring. RGC1FA is the version including the power- switchandthefuseversion with a fuse while the RGC1FS includes also the monitoring function which detects load, fuse and SSR faults.
Ordering Key
The front panel can be opened for easy access of the fuse and the fuse holder accepts fuses from a wide range of manufac- turers. Alarms (in RGC1FS) are indicated by a red LED on the front and a signal which is nor- mally closed. Product width is
35mm for the whole range and coversupto600VACand
40AAC. Specifications stated at
25°C unless specified.
Solid state relay Number of poles Integrated fuse Switching mode
Rated operational voltage
Control voltage
Rated operational current
Connection type for control and power
Output connection configuration
Type Integrated Mode RatedControl Rated Connection Connection fusevoltage voltage current control/ powerconfiguration
RGC1 F A: Zero cross23: 230VACD: 3 or 20: 20AACG: Box Clamp E: Contactor switching + fuse 60: 600VAC4.5 - 32VDC30: 30AAC
+ fuse holder 40: 40AAC
Warning
- Risk of electric shock
S: Zero cross switching
+ fuse + fuse holder
+ system monitoring
- Do not open fuse panel when the product is in operation
- Switch off the panel before doing any maintenance on the product. Panel should be closed before restarting operation.
- Failure to follow these instructions may result in serious injury (or worse) and/or equipment damage
Selection Guide
Rated output voltage Options Control voltage Rated operational current at 40°C
20 AAC30 AAC 40 AAC
230VAC Fuse Only3 -32VDC RGC1FA23D20GGERGC1FA23D30GGE RGC1FA23D40GGE
600VAC Fuse Only4.5 -32VDCRGC1FA60D20GGERGC1FA60D30GGE RGC1FA60D40GGE
230VAC Fuse +Sensing 3 - 32VDCRGC1FS23D20GGERGC1FS23D30GGE RGC1FS23D40GGE
600VAC Fuse +Sensing 4.5 -32VDCRGC1FS60D20GGERGC1FS60D30GGE RGC1FS60D40GGE
Specifications are subject to change without notice (14.03.2014) 1