Selected parameters SYSTEM Accessory LOAD N/A HOUSING WIDTH Up to 22.5mm MOTOR RATING N/A OPERATIONAL VOLTAGE Up to 250VAC LOAD CURRENT Up to 10A CONTROLLED PHASES N/A MAX NUMBER OF STATS PER HOUR N/A Others LOAD (result) RSBT Accessory: Auxiliary Relay Module (Side-Mounting) LOAD CURRENT 2A AC to 5A AC MAX MOTOR RATING N/A OPERATIONAL VOLTAGE N/A DIMENSIONS 17.5 x 67 x 90 mm CONTROLLED PHASES N/A MAX NUMBER OF STATS PER HOUR N/A
Auxiliary Output Module RSBT Accessory Type RSPMV • 17.5mm DIN rail housing • LED indication for supply ON • Plug'n'play design • Output (1):100mA, Open collector, Normally Open (NO) Output (2): 3A SPDT relay * • RoHs compliant • CE, cULus (accessory of listed RSBT) * Only applicable to RSPMV120 Product Description Ordering Key RS P M V 1 2 0 The RSPM accessory is a DIN mounted module intended to be used as an additional accessory for RSBT soft- starter. There are two variants of this product RSPMV110 with a single open-collector output and RSPMV120 which offers an additional SPDT relay contact. The RSPM is designed to provide alarm information, generated by RSBT softstarter, to an exter- nal circuit.When connected to this external circuit, the open collector output may be used toprovidehigher level user information on the RSBT status and alarms. Side-mounting Plug In Module Version DIN mounted Number of Outputs Cable Length Type Selection Type Number of Outputs Output type MountingCable length RSPMV1101 Open-collector (NO) DIN150mm RSPMV1202 SPDT Relay (No/NC),DIN150mm Open-collector (NO) General Specifications Reaction time Alarm ON delay< 200 ms Alarm OFF delay< 300 ms Status indication LEDs Power supply ON LED, green Environment Degree of protection IP20 Pollution degree 2 Operating Temperature-20ºC to +60ºC (-4˚F to 140˚F) Operating Humidity<95% non condensing @ 40˚C Storage Temperature-30ºC to +70ºC (-22˚F to 158˚F) Housing Dimensions (DxWxH)67 x 17.5 x 90 mm CE MarkingYes Approvals CE, cULus Listed ROHS compliantYes EMC Immunity IEC/ EN 61000-6-2 Emission IEC/ EN 61000-6-3 LVDIEC/EN 60947-5-1 Housing Specifications Weight50g (approx.) Housing colour RAL7035 Protection categoryIP20 ConductorData Output terminals Screw type (11,12,14, +, -) M3 Tightening torque 0.4Nm (3.54 lb.in) Stripping length6.0 mm Cross sectional area of cable (stranded) (11,12,14, +, -) 0.34 - 0.75mm2 Cross sectional area of cable (solid) (11,12,14, +, -)0.34 - 0.75mm2 UL/ cUL rated data Rigid (solid or stranded) AWG 1 x 22 .... 18 AWG 2 x 22 .... 18 Rigid (stranded)AWG 1 x 22 + AWG 1 x 18 Specifications are subject to change without notice (20.10.2010) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.