Selected parameters MODULE TYPE Sensor / Detector HOUSING Decentral POWER SUPPLY Bus-powered I/O TYPE Inductive proximity NUMBER OF I/O 1 Others MODULE TYPE Inductive sensor HOUSING M18x57 I/O TYPE Inductive proximity POWER SUPPLY Bus-powered MAIN CHARACTERISTICS Bus-powered inductive sensor M18 with cable connector
Transmitter with Inductive Proximity Switch Function Type G 6110 1145 Duline® FieldbusInstallationbus • Stainless steel housing, cylindrical • Diameter: M18 • Short version • Flush mounting • Sensing distance: 5 mm • Powered by Dupline® • Available with M12 connector or with 2 m cable • Freely programmable channel code by GAP 1605 Product Description Ordering KeyG 6110 1145 Self-powered Dupline®induc- tive proximity switch. The channel code is freely pro- grammable by GAP 1605 pro- grammer.The unitactivates the coded channel whenever the proximity of a metallic object is detected. Type: Dupline® Type Selection Housing diameter Connection Rated operating dist. (Sn)Ordering Number M18Cable 5 mm 1) G 6110 1145 M18M12 plug5 mm 1) G 6110 1145-1 1) For flush mounting in metal InputSpecifications Input Inductive proximity switch Nominal sensing distance Sn5 mm Effective sensing range Sr0.9 x Sn ≤Sr ≤ 1.1 x Sn Usable operating range Su 0.9 x Sr ≤Su ≤ 1.1 x Sr Assured operating range Sa 0 < Sa < 0.81 x Sn Hysteresis H Typ. 7% Response time≤ 1 Dupline®pulse train Supply Specifications Power supplySupplied by Dupline® Reverse polarity protection Yes Rated operational current Typ. 900 µA General Specifications Power On delay Typ. 5 mS Environment Degree of protection IP 67 Pollution degree3 (IEC 60664) Operating temperature-25 to +70°C (-13 to +158°F) Storage temperature -30 to +80°C (-22 to +176°F) Mechanical resistance Tightening torque2.6 Nm Material Housing & BodyStainless steel (1.4301) BackBlack polyester Front Grey thermoplastic polyester Cable typePVC, grey, oil proof, 3 x 0.3 mm2 Cable length 2 m Weight (cable included)25 g Reduction Factors The nominal sensing distance is reduced by the use of metal and alloys other than ST 37. Most important reduction factors for the inductive proximity switch are: Stainless steel 0.6 x Sn Brass0.4 x Sn Aluminium0.3 x Sn Copper 0.2 x Sn Specifications are subject to change without notice (30.01.2007)1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.