Selected parameters MODULE TYPE Repeater HOUSING DIN-rail POWER SUPPLY AC Others MODULE TYPE Repeater HOUSING H8(W144) I/O TYPE None POWER SUPPLY 230 VAC MAIN CHARACTERISTICS Duplinesafe Repeater to enhance transmission distance
Dupline® DuplineSafe Repeater Type GS 3892 0000 • Repeaters make any transmission-distance possible (cascading of repeaters possible) • Power-booster for applications with several Dupline®-supplied units • cULus approved • Number of channels adjusted automatically • H8-housing • LED-indication for power supply, primary Dupline® OK and secondary Dupline® (follows Dupline® carrrier) • Built-in channel generator function for secondary Dupline® • AC power supply Product Description Ordering Key GS38920000230 The Dupline® Repeater is used to increase the distance in a standard Dupline®network, and a Dupline® network with safety modules. Furthermore, itcan be used as a “Pow- er-booster” in sections with several Dupline®-supplied units. Type: Dupline® H8-housing Channel Generator (secondary Dupl.) Power supply Type Selection Supply Ordering no. Supply Specifications Power supplyOvervoltage cat. III (IEC 60664) Rated operational voltage 24 VACGS 3892 0000 024 115 VACGS 3892 0000 115 230 VACGS 3892 0000 230 General Specifications Power ON delay ≤ 5 s Indication for Supply ONLED, green Primary Dupline®OK LED, yellow Secondary Dupline®carrier LED, yellow Environment Degree of protectionIP 40 Pollution degree3 (IEC 60664) Operating temperature0° to +50°C (+32° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F) Humidity (non-condensing) 20 to 80% RH Mechanical resistance Shock15 G (11 ms) Vibration2 G (6 to 55 Hz) Terminals Screwterminals Tightening torque0.8 Nm DimensionsH8-housing (144 x 77 x 70 mm) Weight485 g EMC performance EN61000-6-3 (emission) EN61000-6-1 (immunity) ApprovalscULus Note: Approved by TÜV to be used together with DuplineSafe through term. 21 & 22 230 230 VAC, ±15% (IEC 60038) 115 115 VAC, ±15% (IEC 60038) 24 24 VAC, ±15% Frequency45 to 65 Hz Voltage interruption ≤ 40 ms Rated operational power6 VA Power dissipation ≤ 7 W Rated impulse withstand voltage230 4 kV 115 2.5 kV 24 800 V Dielectric voltage Supply - Primary Dupline® ≥ 4 kVAC (rms) Supply - Secondary Dupline®≥ 4 kVAC (rms) InputSpecifications Input Primary Dupline® Dielectric voltage Primary Dupline to Secondary Dupline®≥ 2 kVAC (rms) Output Specifications OutputSecondary Dupline® Number of outputs1 Output voltage8.2 VDC Current≤ 45 mA Short-circuit protection ≤ 60 s Output impedance≤ 15 Ω Specifications are subject to change without notice (23.10.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.