DuplineSafe Safety Relay Output Module Type GS 3830 0143 Product Description • Safety relay that monitors up to 63 Safety Input Modules • Safety output available on 2 separate relay outputs (NO) • Safety approved according to IEC/EN 61508-SIL3,IEC/EN 62061-SIL3 and ISO/EN 13849-1 PL e • Approval authority: TÜV Rheinland Group • cULus approved • Automatic or manual restart • Status output for external equipment (e.g. PLC) • Operates on a standard Dupline®network • It is possible to use DuplineSafe modules and standard Dupline®modules on the same bus • H8-housing • For mounting on DIN-rail (EN 50022) • LED-indication for supply, relay status, manual restart ready and Dupline®carrier • AC power supply • Configuration with GS73800080 Ordering Key GS 3830 DuplineSafe relay output module approvedaccording to IEC/EN 61508-SIL3,IEC/ EN 62061-SIL3 and ISO/EN 13849-1 PL e by TÜV. The modulemonitorsupto63 DuplineSafeinputmodules, itored.The modulecanbe configured to operate with automaticor manual restart after the safety relays have been released. A non-safe status output isavailable forconnectiontoexternal DuplineSafeH8-Housing Output module Type Selection typenumberGS751021xx. equipment,e.g.aPLC.The The NOrelaycontactsare only in the closed position if Modulemust be configured prior to installation by means SupplyOrdering no. DuplineSafe Safety Input Module a valid “safe state”signal is oftheDuplineSafeconfigur- received from all the Safety Inputmodulesbeingmon- ation unit GS73800080. 230 VAC GS 3830 0143 230 Output Specifications Safety output 2 x NO Relay Contact type Forced contact Contact material Ag-alloy, gold plated Switching voltage250 VAC/VDC Switching capacity6 A AC-1 at 230 V 3 A AC-15 at 230V 5 A DC-13 at 24V Response time 1 max 300ms From input contact of safety input module opens to safety relay releases Response time 2 max 600 ms From input contact of safety input module closes to safety relay activates Status output 1 NPN transistor Safety approvedNo Voltage< 30 VDC Current< 50 mA Voltage drop< 2 V Short-circuit protection No Isolation Output-Dupline®4 kVAC General Specifications Power ON delay < 10 s Environment Degree of protectionIP 20 Pollution degree3 (IEC 60664) Operating temperature-25°C to 50°C Storage temperature -30°C to 70°C Humidity (non-condensing) 20 to 80% Mechanical resistance Shock15 G (11 ms) Vibration2 G (6 to 55 Hz) Terminals Screwterminals Tightening torque0.8 Nm Housing Dimensions H8-housing (144 x 77 x 70 mm) Mounting DIN-rail Approvals IEC/EN 61508-SIL3 IEC/EN 62061-SIL3 ISO/EN13849-1 PL e TÜV Rheinland Group cULus Note: The GS38300143 must be de-energized (power off) before programming til module Safety Specifications Standards SFF 97% PFD (T1 = 1 year)5.5 x 10-6 PFH 9.3 x 10-9/h Supply Specifications Power Supply230 VAC +/- 15% 115 VAC +/- 15% Frequency45 to 65 Hz Power consumption4 VA Power dissipation3 W Specifications are subject to change without notice (23.10.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.