Warenkorb
0
Artikel
Artikel
(Leer)
Keine Artikel
$0.00
Gesamt
Produkt wurde in den Korb gelegt
Menge
Gesamt
Sie haben 0 Artikel in Ihrem Warenkorb.
Es gibt 1 Artikel in Ihrem Warenkorb.
Gesamt Artikel
Gesamt
Vergrößern
XW2R-P34G-C1 372999 XW2R0024F OMRON Klemmenleiste Omron Fujitsu-TAUSEND Push-In 32 zoll
XW2R-P34G-C1
372999
XW2RP34GC1
OMRON
Klemmenleiste Omron Fujitsu-TAUSEND Push-In 32 zoll
Omron Fujitsu-MIL Push-In Klemmenblock 32 IN
Industriesteuerungen SPS > Übergabemodul
Steuerungssysteme > XW2
* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von OMRON
Mehr Infos
▲- Modelle mit Anschluss für Kreuzschlitzschraube, Schlitzschraube, Push-In oder e-CON erhältlich.
- Die Klemmenanordnung ermöglicht eine einfachere Verdrahtung.
- Push-In-Klemmen vereinfachen die Verdrahtung und erleichtern die Verwendung der Anschlussklemmenblöcke (im Vergleich zum OMRON XW2F).
- Montage auf DIN-Schiene möglich.
Spezifikationen & Bestellinfo
Ordering Information
Withpower supply terminals
e-CON Type
| Appearance | I/O Points | I/O | Mounted Connector model | Cable Connector model | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. |
|---|---|---|---|---|---|
| 8 Points | Input | XG4A-1431 (MIL Connector) XN2D-4471 (e-CON Connector) | XG4M-1430-T (MIL Connector) XN2A-1470 (e-CON Connector) | XW2R-N08GD-COM |
Input DeviceConnectors
XN2 e-CON Connectors
| Appearance | Number of poles | Description | Order code |
|---|---|---|---|
 | 4 | For Sensor | XN2A-1470 |
 | 4 | Relay Connector | XN2B-1470 |
Without powersupply terminals
Phillips screw
| Appearance 2 The mounted Connector shown inthe appearance illustration is a MIL Connector. | Mounted Connector model | Number of poles | Dimension A (mm) | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. | |
|---|---|---|---|---|---|
| MIL Connector | XG4A-2031 | 20 | 81.7 | XW2R-J20GD-T | |
| XG4A-3431 | 34 | 130.7 | XW2R-J34GD-T | ||
| XG4A-4031 | 40 | 151.7 | XW2R-J40GD-T | ||
| XG4A-5031 | 50 | 186.7 | XW2R-J50GD-T | ||
| XG4A-6031 | 60 | 221.7 | XW2R-J60GD-T | ||
| FCN Connector | FCN-364P040-AU | 40 | 151.7 | XW2R-J40FD-T | |
Slotted screw (rise up)
| Appearance 2 The mounted Connector shown inthe appearance illustration is a MIL Connector. | Mounted Connector model | Number of poles | Dimension A (mm) | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. | |
|---|---|---|---|---|---|
| MIL Connector | XG4A-2031 | 20 | 64.4 | XW2R-E20GD-T | |
| XG4A-3431 | 34 | 98.5 | XW2R-E34GD-T | ||
| XG4A-4031 | 40 | 113.5 | XW2R-E40GD-T | ||
| XG4A-5031 | 50 | 138.5 | XW2R-E50GD-T | ||
| XG4A-6031 | 60 | 163.5 | XW2R-E60GD-T | ||
| FCN Connector | FCN-364P040-AU | 40 | 113.5 | XW2R-E40FD-T | |
Push-in spring
| Appearance 2 The mounted Connector shown inthe appearance illustration is a MIL Connector. | Mounted Connector model | Number of poles | Dimension A (mm) | Order code 2 Only DIN Track mounting modelsare described here. Refer to the XW2R-series Connector-TerminalBlock Conversion Units Catalog (Cat. No. G077) for information onscrew mounting models. | |
|---|---|---|---|---|---|
| MIL Connector | XG4A-2031 | 20 | 64.4 | XW2R-P20GD-T | |
| XG4A-3431 | 34 | 98.5 | XW2R-P34GD-T | ||
| XG4A-4031 | 40 | 113.5 | XW2R-P40GD-T | ||
| XG4A-5031 | 50 | 138.5 | XW2R-P50GD-T | ||
| XG4A-6031 | 60 | 163.5 | XW2R-P60GD-T | ||
| FCN Connector | FCN-364P040-AU | 40 | 113.5 | XW2R-P40FD-T | |
Specifications
| Item | XW2R-N⬜ | XN2⬜ | XW2R-J⬜ | XW2R-E⬜ | XW2R-P⬜ | |
|---|---|---|---|---|---|---|
| Rated current | Power supply terminal block: 2 A, Connectors/e-CON Connectors: 1 A (However, rated current of e-CON Connector depends on the wires that are used.) | 3 A/pin (with AWG20 wires), 2 A/pin (with AWG22 wires), 1 A/pin (with AWG24 wires), 0.5 A/pin (with AWG26 or AWG28 wires) | 1 A | |||
| Rated voltage | 24 VDC | 32 VDC | 125 VAC, 24 VDC | |||
| Contact resistance | – | 30 mΩ max. (at 20 mV, 100 mA max.) | – | |||
| Insurationresistance | 100 MΩ min. (at 500VDC) | 103MΩ min. (at 500 VDC) | 100 MΩ min. (at 500 VDC) | |||
| Dielectricstrength | 500 VAC for 1 min (leakage current: 1 mA max.) | 1,000 VAC for 60 sec (leakage current: 1 mA max.) | 500 VAC for 1 min (leakage current: 1 mA max.) | |||
| Insertiondurability | – | 50 times | – | |||
| Ambient operating temperature | 0 to 55°C | –30 to 75°C 2 The operating temperature rangeis restricted by the maximum operating temperature of the cable. | 0 to 55°C | |||
| Applicable wires | Applicable wire sizes 2 This is the applicable range for the Power supply terminals. | AWG 24 to 14 (ferrules), AWG 28 to 14 (stranded wires), AWG 28 to 16 (solid wires) (Outer diameter of insulation must be 4 mm max) | Stranded wire 0.08 mm 2 (AWG28) to 0.5 mm 2 (AWG20) (Outer diameter of insulation must be 1.5 mm max) | AWG 22 to 16 (round or forked crimp terminals) AWG 26 to 16 (stranded or solid wires) | AWG 22 to 16 (ferrules) AWG 26 to 16 (stranded or solid wires) | AWG 24 to 14 (ferrules) AWG 28 to 14 (stranded or solid) (Outer diameter of insulation must be 4 mm max) |
| Stripped length | AWG28-16: 8 to 10 mm AWG14: 9 to 10 mm | – | 9 mm | 7 mm | AWG28-16: 8 to 10 mm AWG14: 9 to 10 mm | |
| Tightening | – | 0.5 N·m | 0.5 to 0.6 N·m | – | ||
Bewertungen (0) ▲
Es gibt keine Produktbewertungenvor.
Bewertung abgeben
Formular verstecken
| Wertung: |
|
| Name: | |
| E-Mail : | |
| Betreff: | |
| Text: | |
| Haben Sie dieses Produkt empfehlen zu kaufen? | |
|
|
|
| Bewertung abgeben | |
Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.