Produkt wurde in den Korb gelegt
BP-F-600/20/3-F-IVS-W
111406
EATON-MOELLER
1
Standverteiler, IVS, IP30, HxBxT=2060x600x300mm, weiß, ohne Tür
Home > EATON - MOELLER
* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von EATON-MOELLER
Danke für Ihr Interesse an unseren Produkten, wir hoffen die Lieferzeit ist ok.
Während der Bestellung können Sie den für Sie bestmöglichen Versand wählen: Express 24h, Standard 48h/72h, etc.
Product range | Service distribution board IVS | ||
Basic function | Floor-standing enclosures | ||
Single unit/Complete unit | Complete housing | ||
Degree of Protection | IP30 (only with door) | ||
Description | Profi Plus basic enclosures without door Exchangeable door hinges | ||
Material | Sheet steel | ||
Surface finish | Polyester powder coating Phosphated RAL 9016, traffic white | ||
Colour | RAL 9016, traffic white | ||
Information about equipment supplied | Including mounting system for the IVS mounting units including insulating surround and mounted insulated support bracket including cable entry top and bottom, with push-through flange | ||
Width | mm | 600 | |
Height | mm | 2060 | |
Depth | mm | 300 |
General | |||
Standards | EN 60439-1/3 IEC 62208 | ||
Protection class | 1 | ||
Degree of Protection | IP30 (only with door) | ||
Power loss | |||
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 293 | |
Weight | kg | 39.9 | |
Material characteristics | |||
Material | Sheet steel | ||
Surface treatment | Painting, phosphated and polyester powder coating | ||
Surface finish | Polyester powder coating Phosphated RAL 9016, traffic white | ||
Colour | RAL 9016, traffic white | ||
Material characteristics | |||
Type Door | Doors with covered hinges Can be removed from 90° | ||
door opening angle | 167° (single mounting) 60° (combination mounting) | ||
Door interlock | Hinge handle with three-point turn-lock Cylinder lock | ||
Material properties | |||
Mechanical | |||
Impact resistance | IK07 | ||
Cable entry | Various covers allow cable entry from above and/or below | ||
Electrical | |||
Rated operational voltage | Ue | V | 690 |
Rated frequency | f | Hz | 50 |
Rated operational current | Ie | CSA | 630 |
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 293 | |
Earthings | M6 weld stud (base frame) M5 self-tapping screw (enclosure side plate, top/bottom panel) M6 weld stud (door) |
Technical data for design verification | |||
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890 | |||
Individual enclosure, free-standing | PV | CO | 171 |
Starting enclosure, free-standing | PV | CO | 164 |
Middle enclosure, free-standing | PV | CO | 147 |
Individual enclosure for wall mounting | PV | CO | 147 |
Starting enclosure for wall mounting | PV | CO | 133 |
Middle enclosure for wall mounting | PV | CO | 123 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890 | |||
Individual enclosure, free-standing | PV | CO | 343 |
Starting enclosure, free-standing | PV | CO | 329 |
Middle enclosure, free-standing | PV | CO | 294 |
Individual enclosure for wall mounting | PV | CO | 294 |
Starting enclosure for wall mounting | PV | CO | 268 |
Middle enclosure for wall mounting | PV | CO | 247 |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Not relevant to indoor installations. | ||
10.2.5 Lifting | Met; assembled and secured as per the latest applicable instruction leaflet. | ||
10.2.6 Mechanical impact | IK07 | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | IP30 | ||
10.4 Clearances and creepage distances | Is the panel builder's responsibility. | ||
10.5 Protection against electric shock | < 0.1 Ω; meets the product standard's requirements. | ||
10.6 Incorporation of switching devices and components | Is the panel builder's responsibility. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Ui= 440 V AC | ||
10.9.3 Impulse withstand voltage | 4 kV | ||
10.9.4 Testing of enclosures made of insulating material | Does not apply to metal enclosures. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | Meets the product standard's requirements. |
Sortiment | Installationsverteiler IVS | ||
Grundfunktion | Standverteiler | ||
Einzelgerät/Komplettgerät | Komplettgehäuse | ||
Schutzart | IP30 (nur mit Tür) | ||
Beschreibung | Basisgehäuse Profi Plus ohne Tür Türanschlag wechselbar | ||
Werkstoff | Stahlblech | ||
Oberflächenbeschaffenheit | Polyesterpulverbeschichtung phosphatiert RAL 9016, verkehrsweiß | ||
Farbe | RAL 9016, verkehrsweiß | ||
Information zum Lieferumfang | inklusive Trägersystem zur Aufnahme der IVS-Einbaueinheiten inklusive Blendrahmen und aufgebauten Isolierstoffhaltern inklusive Kabeleinführung oben und unten, mit Durchsteckflansch | ||
Breite | mm | 600 | |
Höhe | mm | 2060 | |
Tiefe | mm | 300 |
Allgemeines | |||
Normen und Bestimmungen | EN 60439-1/3 IEC 62208 | ||
Schutzklasse | 1 | ||
Schutzart | IP30 (nur mit Tür) | ||
Abführbare Verlustleistung | |||
Max. zulässige Verlustleistung, Umgebungstemperatur +35 °C | W | 293 | |
Gewicht | kg | 39.9 | |
Material | |||
Werkstoff | Stahlblech | ||
Oberflächenbehandlung | Lackierung, phosphatiert und polyesterpulverbeschichtet | ||
Oberflächenbeschaffenheit | Polyesterpulverbeschichtung phosphatiert RAL 9016, verkehrsweiß | ||
Farbe | RAL 9016, verkehrsweiß | ||
Material | |||
Ausführung Tür | Türen mit verdeckten Scharnieren aushängbar ab 90° | ||
Türöffnungswinkel | 167° (Einzelmontage) 60° (Anreihmontage) | ||
Türverriegelung | Scharniergriff mit Drehriegelverschluss Zylinderschloss | ||
Materialeigenschaften | |||
mechanisch | |||
Stoßfestigkeit | IK07 | ||
Kabeleinführung | verschiedene Abdeckungen ermöglichen die Kabeleinführung von unten und/oder oben | ||
elektrisch | |||
Bemessungsbetriebsspannung | Ue | V | 690 |
Bemessungsfrequenz | f | Hz | 50 |
Bemessungsbetriebsstrom | Ie | A | 630 |
Max. zulässige Verlustleistung, Umgebungstemperatur +35 °C | W | 293 | |
Erdungen | M6 Schweißbolzen (Grundrahmen) M5 Schneidschraube (Seitenwand, Dach/Boden-Paneel) M6 Schweißbolzen (Tür) |
Technische Daten für Bauartnachweis | |||
Verlustleistung, bei Umgebungstemperatur 35°C, Delta T 20 Grad, kalkuliert nach IEC60890 | |||
Einzelgehäuse freistehend | PV | W | 171 |
Anfangsgehäuse freistehend | PV | W | 164 |
Mittelgehäuse freistehend | PV | W | 147 |
Einzelgehäuse für Wandanbau | PV | W | 147 |
Anfangsgehäuse für Wandanbau | PV | W | 133 |
Mittelgehäuse für Wandanbau | PV | W | 123 |
Verlustleistung, bei Umgebungstemperatur 35°C, Delta T 35 Grad, kalkuliert nach IEC60890 | |||
Einzelgehäuse freistehend | PV | W | 343 |
Anfangsgehäuse freistehend | PV | W | 329 |
Mittelgehäuse freistehend | PV | W | 294 |
Einzelgehäuse für Wandanbau | PV | W | 294 |
Anfangsgehäuse für Wandanbau | PV | W | 268 |
Mittelgehäuse für Wandanbau | PV | W | 247 |
Bauartnachweis IEC/EN 61439 | |||
10.2 Festigkeit von Werkstoffen und Teilen | |||
10.2.2 Korrosionsbeständigkeit | Anforderungen der Produktnorm sind erfüllt. | ||
10.2.3.1 Wärmebeständigkeit von Umhüllung | Anforderungen der Produktnorm sind erfüllt. | ||
10.2.3.2 Widerstandsfähigkeit Isolierstoffe gewöhnliche Wärme | Anforderungen der Produktnorm sind erfüllt. | ||
10.2.3.3 Widerstandsfähigkeit Isolierstoffe außergewöhnliche Wärme | Anforderungen der Produktnorm sind erfüllt. | ||
10.2.4 Beständigkeit gegen UV-Strahlung | Nicht relevant für Innenraumaufstellung. | ||
10.2.5 Anheben | Erfüllt, aufgebaut und gesichert entsprechend aktuell gültiger Montageanweisung. | ||
10.2.6 Schlagprüfung | IK07 | ||
10.2.7 Aufschriften | Anforderungen der Produktnorm sind erfüllt. | ||
10.3 Schutzart von Umhüllungen | IP30 | ||
10.4 Luft- und Kriechstrecken | Liegt in der Verantwortung des Schaltanlagenbauers. | ||
10.5 Schutz gegen elektrischen Schlag | < 0,1 Ω, Anforderungen der Produktnorm sind erfüllt. | ||
10.6 Einbau von Betriebsmitteln | Liegt in der Verantwortung des Schaltanlagenbauers. | ||
10.7 Innere Stromkreise und Verbindungen | Liegt in der Verantwortung des Schaltanlagenbauers. | ||
10.8 Anschlüsse für von außen eingeführte Leiter | Liegt in der Verantwortung des Schaltanlagenbauers. | ||
10.9 Isolationseigenschaften | |||
10.9.2 Betriebsfrequente Spannungsfestigkeit | Ui= 440 V AC | ||
10.9.3 Stoßspannungsfestigkeit | 4 kV | ||
10.9.4 Prüfung von Umhüllungen aus Isolierstoff | Nicht zutreffend für Gehäuse aus Metall. | ||
10.10 Erwärmung | Erwärmungsberechnung liegt in der Verantwortung des Schaltanlagenbauers. Eaton liefert die Daten zur Verlustleistung der Geräte. | ||
10.11 Kurzschlussfestigkeit | Liegt in der Verantwortung des Schaltanlagenbauers. | ||
10.12 Elektromagnetische Verträglichkeit | Liegt in der Verantwortung des Schaltanlagenbauers. | ||
10.13 Mechanische Funktion | Anforderungen der Produktnorm sind erfüllt. |
Titel: | Größe: | Typ: |
---|---|---|
PDF CATALOGUE EATON EN.pdf | 51 Mbytes |
Es gibt keine Produktbewertungenvor.
Wertung: | |
Name: | |
E-Mail : | |
Betreff: | |
Text: | |
Haben Sie dieses Produkt empfehlen zu kaufen? | |
Bewertung abgeben |
Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.