AO1036 CARLO GAVAZZI Ausgwählte Kriterien Sonstiges

AO1036

CARLO GAVAZZI

Verfügbar

Schiff am heute

Ausgwählte Kriterien Sonstiges

Mehr Infos


Management Control Energie Analysatoren

Controls

Modulare Energiezähler und Netzanalysatoren, Software und Zubehör

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von CARLO GAVAZZI

Menge Preis
1+$83.51
3+$78.30
6+$75.93
8+$75.11
11+$74.32
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Verwandte Produkte

Mehr Infos



Energy Management
Modular Smart Power Quality Analyzer
Type WM3-96
• Class 0.5 (current/voltage)
• 32-bit µP-based modular smart power quality analyzer
• Graph display (128x64 dots)
• Front size: 96x96 mm
• Measurements of single phase and system variables: W, Wdmd,
VA, VAdmd, PF, PFavg, V, A, An dmd (for all of them max. and
min. values). Energies: ±kWh, 4 quadrant varh measurement.
• Neutral current measurement
• TRMS measurement of distorted waves (voltage/current)
• Current and voltage inputs with autoranging capability
• 4x4-dgt instantaneous variable read-out
• 4x9-dgt total energies read-out
• 4x6-dgt partial energies read-out
• 48 independent energy meters to be used as single,
dual, multi-time energy management
• Sampling rate: 10 samples/s
• Harmonic distorsion analysis (FFT) up to 50th harmonic
with both graph and numerical indication (of current
and voltage)
• Harmonics source detection
• Optional RS232 + real time clock function with data
logging of alarm and MIN/MAX events, montly energy
metering recording
• Degree of protection (front): IP 65
• Up to 4 optional alarm setpoints
• Up to 4 optional pulse outputs
• Up to 4 optional analogue outputs
• Optional serial RS 422/485 output
• Universal power supply: 18 to 60VAC/DC - 90 to 260 VAC/DC
• MODBUS RTU, JBUS, N2 METASYS protocols (on request)
Product Description
32-bit µP-based smart power quality analizer with a built-in configuration key-pad.
The housing is for panel mounting and ensures a degree of protection (front) of IP 65. The instrument is par-
Type Selection
ticularly indicated for those application where there is the need to control the power supply quality. The variables being displayed are more than 400.
Ordering Key WM3-96AV53H XX XX XX XX X
Model Range code System
Power supply
Slot A Slot B Slot C Slot D Options
Range code
AV5: 240/415 VAC -
1/5 AAC
(max. 300 V (L-N)/
520 V (L-L) - 6 A) (standard)
AV7: 400/690VAC -
1/5 AAC
(max. 480V (L-N) /
Slot A (signal retransmission)
XX: None
A1: Single analogue output,
20mADC (standard)
A2: Single analogue output,
±5mADC 1)
A3: Single analogue output,
±10mADC 1)
A4: Single analogue output,
1)
Slot B (communication)
XX: None
B1: Dual analogue output,
20mADC (standard)
B2: Dual analogue output,
±5mADC 1)
B3: Dual analogue output,
±10mADC 1)
B4: Dual analogue output,
1)
Slot C (alarm or pulse out)
XX: None
R1: Single relay output, (AC1-8AAC, 250VAC) 1)
R2: Dual relay output,
(AC1-8AAC, 250VAC) 1)
O1: Single open collector output (30V/100mADC) 1)
O2: Dual open collector out-
1)
830 V (L-L) / 6 A 1)
B1:
±20mADC
Dual analogue
output,
±20mADC
W1: Dual analogue output,
put (30V/100mADC)
D1: 3 digital inputs 1)
System
20mADC (standard)
B2: Dual analogue output,
±5mADC 1)
10VDC (standard)
W2: Dual analogue output,
±1VDC 1)
Slot D (alarm or pulse out)
3: One phase, three-
B3: Dual analogue output,
±10mADC 1)
W3: Dual analogue output,
±5VDC 1)
phase system
(3 or 4 wires, balan- ced load)
Three phase system (3 or 4 wires, unba- lanced load)
Power supply
B4: Dual analogue output,
±20mADC 1)
V1: Single analogue output,
10VDC (standard)
V2: Single analogue output,
±1VDC 1)
V3: Single analogue output,
±5VDC 1)
W4: Dual analogue output,
±10VDC 1)
S1: Serial port,
RS485 multidrop, bidirectional 1)
Note:
XX: None
R2: Dual relay output,
(AC1-8AAC, 250VAC) 1)
O2: Dual open collector out- put (30V/100mADC) 1)
O4: 4 open collector out- puts (30V/100mADC) 1)
V4: Single analogue output,
±10VDC 1)
Slot A + Slot B
Max 4 analogue outputs
Options
L: 18 to 60VAC/DC 1)
H: 90 to 260VAC/DC
1) On request
W1: Dual analogue output,
10VDC (standard)
W2: Dual analogue output,
±1VDC 1)
W3: Dual analogue output,
±5VDC 1)
W4: Dual analogue output,
±10VDC 1)
Slot C + Slot D
max 4 digital outputs
X: None
S: Serial RS232 + RTC N: With N2 Metasys protocol C: options: S+N
Specifications are subject to change without notice WM3-96DS0303 1

Datasheet - PDF

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben

Aktuelle Bewertungen unserer Kunden

Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.