- Наглядные двухцветные светодиодные индикаторы (красного и желтого цвета) позволяют легко проверить состояние переключателя.
- Возможна установка с любой стороны, что позволяет выбрать самый удобный способ прокладки проводки для установки на двери любого типа
- Компактный исполнительный механизм имеет меньший размер, чем у переключателя, что обеспечивает экономию пространства даже внутри двери.
- Сокращайте трудозатраты и необходимое количество запасов с помощью разъема
- Сокращайте расходы, подключая до 30 переключателей к одному контроллеру
Характеристики и информация для заказа
Ordering information
Non-contact door switches (switch/actuator)
Classification | Auxiliary outputs | Cable length | Order code |
---|
Standard models | Semiconductor outputs1 | 2 m | D40A-1C2 |
5 m | D40A-1C5 |
Pigtail with M12 connector 4-pole | D40A-1C015-F |
Non-contact door switch controllers (Controllers for D40A)
Safety outputs2 | Auxiliary outputs3 | Logical AND connection input | Logical AND connection output | Max. OFF delay time4 | Rated voltage | Terminal block type | Order code |
---|
Instantaneous | OFF-delayed5 |
---|
2 (Semi- conductors) | 0 | 2 (Semi-conductors) | 1 | 1 | − | 24 VDC | Screw terminals | G9SX-NS202-RT |
Spring-cage terminals | G9SX-NS202-RC |
2 (Semi- conductors) | 3.0 s | Screw terminals | G9SX-NSA222-T03-RT |
Spring-cage terminals | G9SX-NSA222-T03-RC |
Specifications
Ratings/characteristics of non-contact door switches
Item | Model | D40A-1C_ |
---|
Operating characteristics6 | Operating distance OFF®ON | 5 mm min. |
Operating distance ON®OFF | 15 mm max. |
Differential travel (max.) | 20% of operating distance |
Ambient operating temperature | −10 to 55°C (no icing or condensation) |
Vibration resistance | 10 to 55 to 10 Hz (single amplitude: 0.75 mm, double amplitude: 1.5 mm) |
Shock resistance | 300 m/s2min. |
Degree of protection | IP67 |
Material | PBT resin |
Mounting method | M4 screws |
Power consumption | 0.6 W max. |
Auxiliary outputs7 | 24 VDC, 10 mA (PNP open-collector outputs) |
LED indicators | Actuator not detected (red); actuator detected (yellow) |
Connection cables | 2 m, 5 m |
Number of connectable switches | 30 max. (wiring length: 100 m max.) |
Ratings of non-contact door switch controllers
Power input
Item | G9SX-NS202-_ | G9SX-NSA222-T03-_ | G9SX-EX-_ |
---|
Rated supply voltage | 24 VDC |
Inputs
Item | G9SX-NS202-_/G9SX-NSA222-T03-_ |
---|
Safety input8 | Operating voltage: 20.4 VDC to 26.4 VDC, internal impedance: approx. 2.8 kΩ |
Feedback/reset input |
Outputs
Item | G9SX-NS202-_/G9SX-NSA222-T03-_ |
---|
Instantaneous safety output OFF-delayed safety output | P channel MOS FET transistor output Load current: 0.8 A DC max. |
Auxiliary output | PNP transistor output Load current: 100 mA max. |
Non-contact door switch and non-contact door switch controller wiring |
Example: Wiring a single switch
Note: The auxiliary output load current must be 10 mA max. | Example: Wiring multiple switches Connect up to 30 Non-contact door switches
|
1.PNP open-collector semiconductor output.
Note: Must be used in combination with a G9SX-NS_ non-contact door switch controller.
2.P channel MOS FET transistor output
4.The OFF-delay time can be set in 16 steps as follows:
0/0.2/0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.4/1.8/2.0/2.5/3.0 s
5.The OFF-delayed output becomes an instantaneous output by setting the OFF-delay time to 0 s.
6.This is the distance where the switch operates from OFF to ON when approaching and the distance where the switch operates from ON to OFF when separating when the switch and actuator target marks are on the same axis, and the sensing surfaces coincide.
7.Turns ON when the actuator is approaching.
8.Only applies to the G9SX-NSA222-T03-_. Refers to input other than that from the non-contact door switch.