SFBP800 nVent HOFFMAN Support bar, 800 SFBP800

Description:

Enables partial height swing frames to be mounted in wall mounted, steel enclosures, and floor standing, combinable, steel enclosures. The swing frames can be mounted to allow both left and right hand opening.

Material:

3 mm zinc plated steel.

Pack quantity:

1 complete kit including mounting brackets for one swing frame.

Mounting requirements:

For wall mounted, steel enclosures, use in combination with the AVB profiles. For floor standing enclosures, it can be mounted directly to the enclosure frame or adjustable in depth, in steps of 25 mm, by means of the CLPK.

Feature:

Zinc plated transversal support bars for 19" partial swing frames mounted within wall mounted and floor standing enclosures.

Advantage:

The transversal support bars allows 19" partial swing frames to be mounted within wall mounted and floor standing enclosures. The swing frame can be adjusted in height by 25mm increments, within floor standing enclosures.

Benefit:

The support bars provide customers with a strong fixation method for the partial swing frame as it is mounted directly to the enclosures frame or body. Procurement is simplified as the same accessory can be used on both wall mounted and floor standing enclosures.

Comment:

Vertical mounting profiles, AVB, are required to be mounted within wall mounted enclosures before the transversal support bars can be fixed. If the bars require adjustment in depth within floor standing enclosures, then click-in profiles, CLPK, are required.