CS1W-OD261 CS1W3011A 182921 OMRON Módulo 64 Saídas NPN

CS-Series digital I/O units Rack PLC
Up to 96 I/O points per unit – input, output or mixed
Digital I/O units serve as the PLC's interface to achieve fast, reliable sequence control. A full range of units, from high-speed DC inputs to relay outputs, let you adapt CS1 to your needs.
CS1 units are available with various I/O densities and connection technologies. Up to
16 I/O points can be wired to units with detachable M3 screw terminals directly. High- density 32- and 64- point I/O units are equipped with standard 40-pin connectors.
Prefabricated cables and wiring terminals are available for easy interfacing to high- density I/O units.
Ordering information
Points Type Rated voltage Rated current
Remarks Connection type Order code*1
16 AC or DC input 120 VAC or VDC 10 mA – M3 CS1W-IA111
16 AC input 240 VAC 10 mA – M3 CS1W-IA211
16 DC input 24 VDC 7 mA – M3 CS1W-ID211
16 DC input 24 VDC 7 mA Inputs start interrupt tasks in PLC program M3 CS1W-INT01
16 DC input 24 VDC 7 mA Latches pulses down to 50 μs pulse width M3 CS1W-IDP01
32 DC input 24 VDC 6 mA – 1 × 40 pt Fujitsu CS1W-ID231
64 DC input 24 VDC 6 mA – 2 × 40 pt Fujitsu CS1W-ID261
96 DC input 24 VDC 5 mA – 2 × 56 pt Fujitsu CS1W-ID291
8 Triac output 250 VAC 1.2 A – M3 CS1W-OA201
16 Triac output 250 VAC 0.5 A – M3 CS1W-OA211
8 Relay output 250 VAC 2.0 A – M3 CS1W-OC201
16 Relay output 250 VAC 2.0 A – M3 CS1W-OC211
16 DC output (sink) 12 to 24 VDC 0.5 A – M3 CS1W-OD211
16 DC output (source) 24 VDC 0.5 A With short-circuit protection, alarm M3 CS1W-OD212
32 DC output (sink) 12 to 24 VDC 0.5 A – 1 × 40 pt Fujitsu CS1W-OD231
32 DC output (source) 24 VDC 0.5 A With short-circuit protection, alarm 1 × 40 pt Fujitsu CS1W-OD232
64 DC output (sink) 12 to 24 VDC 0.3 A – 2 × 40 pt Fujitsu CS1W-OD261
64 DC output (source) 24 VDC 0.3 A With short-circuit protection, alarm 2 × 40 pt Fujitsu CS1W-OD262
96 DC output (sink) 12 to 24 VDC 0.1 A – 2 × 56 pt Fujitsu CS1W-OD291
96 DC output (source) 24 VDC 0.1 A – 2 × 56 pt Fujitsu CS1W-OD292
32+32 DC output (sink) 12 to 24 VDC 0.3 A – 2 × 40 pt Fujitsu CS1W-MD261
32+32 DC in+out (source) 24 VDC 0.3 A With short-circuit protection, alarm 2 × 40 pt Fujitsu CS1W-MD262
48+48 DC output (sink) 12 to 24 VDC 0.1 A – 2 × 56 pt Fujitsu CS1W-MD291
48+48 DC in+out (source) 12 to 24 VDC 0.1 A – 2 × 56 pt Fujitsu CS1W-MD292
*1 C200H I/O units can also be mounted, except on CS1D systems.
Note: All Digital I/O units are designated as Basic I/O units.
Accessories
Description Connection type Order code
Connection cable between I/O terminal block and I/O unit with 40-pt Fujitsu connector ( _ _ _ = length in cm) Fujitsu (40pt) XW2Z- B
I/O terminal block for input unit with 40-pt Fujitsu connector Push-in XW2R-P34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connector Push-in XW2R-P34G-C3
I/O terminal block for input unit with 40-pt Fujitsu connector Clamp XW2R-E34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connector Clamp XW2R-E34G-C3
I/O terminal block for input unit with 40-pt Fujitsu connector M3 Screws XW2R-J34G-C1
I/O terminal block for output unit with 40-pt Fujitsu connector M3 Screws XW2R-J34G-C3
Note: For I/O Cables and Terminal Blocks, see page 72
39