OIDES495405 nVent HOFFMAN Extensão HMI, 495x542x55 OIDES495405

Descrição:

OICP painel articulado com perfil de extensão porta. Ele aumenta a profundidade de painel OICP em 55 mm. Tem perfis da rede nas laterais do perfil de extensão porta.

Material:

Estrutura e extensor da porta: Al Mg Si05, painel: Al Mg, e Cantos: Al Si12.

Protecção:

Cumpre a normativa IP 65.

Acabamento:

Estrutura e extensor da porta: alumínio anodizado, e Cantos: RAL 7016.

Quantidade por embalagem:

OICP painel com placa posterior, módulo extensor de porta, dobradiças externas, e sistema de fechadura.

Feature:

Aluminium operator interface control panel, with a pre-machined hole pattern to mount onto a swing arm system, hinged extension frame, removable aluminium front plate accessory and a IP 65 protection degree.

Advantage:

Components can be installed easily because of the removable front panel (supplied as an accessory). Installed components are easily accessible due to the removable rear panel and hinged extension frame which also increases the panels depth by 55 mm. The enclosure's pre-machined cut-out allows the panel to be quickly mounted to the swing arm system in the field. The pre-mounted enclosure side handles allow customers to manipulate the enclosure easily when performing operations. The aluminium body will dissipate a larger amount of heat, that has been generated from the installed components.

Benefit:

The enclosure reduces customer's labour cost and allows ergonomic use in the field, due to the pre-installed handles. The internal temperature of the control panel is kept low which may remove the requirement for ventilation. The depth extension frame allows customers to install larger components, if required.

Comment:

The aluminium front plate (OIFP), must be ordered separately.