LN4-4-1000-I 112017 EATON MOELLER interruptor de 4P, 1000A Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

LN4-4-1000-I 112017 EATON MOELLER interruptor de 4P, 1000A

LN4-4-1000-I

112017

EATON - MOELLER

Disponível

Envio hoje

Produto sob demanda, sem reembolso.

interruptor de 4P, 1000A

Mais detalhes


Disjuntores

Circuit-breakers LZM - EATON - MOELLER

Switches LN - EATON - MOELLER

* Produto novo em sua embalagem original com todas as garantias e certificações de EATON - MOELLER

*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Como funciona

Como é que isso funciona?

1 Adicione os produtos de sua escolha ao carrinho de compras
2 Introduza os seus dados de contato e envie sua solicitação
3 Você será notificado por e-mail com a nossa cotação
4 Você simplesmente aceite o orçamento e espere a sua encomenda

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Produtos relacionados

Mais informação



Delivery programme
Product range
  Switch-disconnectors
Protective function
  Disconnectors/main switches
Standard/Approval
  IEC
Installation type
  Fixed
Construction size
  LN4
Description
  Main switch characteristics including positive drive to IEC/EN 60204 and VDE 0113.
Isolating characteristics to IEC/EN 60947-3 and VDE 0660.
Busbar tag shroud to VDE 0160 Part 100.
Number of poles
  4 pole
Standard equipment
  Screw connection
Switch positions
  I, +, 0
Rated current = rated uninterrupted current
In = IuA1000
Short-circuit protection max. fuse gL-characteristic
 A gL1600
Technical data
Switch-disconnectors
Rated surge voltage invariability
Uimp  
Main contacts
 V8000
Auxiliary contacts
 V6000
Rated operational voltage
UeV AC690
Rated current = rated uninterrupted current
In = IuA1000
Overvoltage category/pollution degree
  III/3
Rated insulation voltage
UiV1000
Use in unearthed supply systems
 V
Basic equipment        
 Box terminal  - - -
 Screw connection -   
accessory consideration        
 Box terminals -   -
 Screw connection  - - 
 Tunnel terminal    
 connection on rear    
 Strip terminal - - - 
Round copper conductor
   
Tunnel terminal
   
Stranded
 mm2 
4-hole
 mm24 x (50 - 240)
Bolt terminal and rear-side connection
   
Direct on the switch
   
Stranded
 mm21 x (120 - 185)
4 x (50 - 185)
Module plate
   
Single hole
min.mm21 x (120 - 300)
Single hole
max.mm22 x (95 - 300)
Module plate
   
Double hole
min.mm22 x (95 - 185)
Double hole
max.mm24 x (35 - 185)
Connection width extension
 mm2 
Connection width extension
 mm24 x 300
6 x (95 - 240)
Al conductors, Cu cable
   
 
   
Stranded
 mm2 
4-hole
 mm24 x (50 - 240)
Bolt terminal and rear-side connection
   
Flat copper strip, with holes
min.mm(2 x) 10 x 50 x 1.0
Flat copper strip, with holes
max.mm(2 x) 10 x 50 x 1.0
Connection width extension
 mm(2 x) 10 x 80 x 1.0
Cu strip (number of segments x width x segment thickness)
   
Flat conductor terminal
   
 
min.mm6 x 16 x 0.8
 
max.mm(2 x) 10 x 32 x 1.0
Module plate
   
Single hole
 mm(2 x) 10 x 50 x 1.0
Bolt terminal and rear-side connection
   
Flat copper strip, with holes
min.mm(2 x) 10 x 50 x 1.0
Flat copper strip, with holes
max.mm(2 x) 10 x 50 x 1.0
Connection width extension
 mm(2 x) 10 x 80 x 1.0
Copper busbar (width x thickness)
mm  
Bolt terminal and rear-side connection
   
Screw connection
  M10
Direct on the switch
   
 
min.mm25 x 5
 
max.mm2 x (50 x 10)
2 x (80 x 10)
Module plate
   
Single hole
min.mm25 x 5
Single hole
max.mm2 x (50 x 10)
Module plate
   
Double hole
 mm2 x (50 x 10)
Connection width extension
 mm 
Connection width extension
min.mm60 x 10
Connection width extension
max.mm2 x (80 x 10)
Control cables
   
 
 mm21 x (0.75 - 2.5)
2 x (0.75 - 1.5)
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA1000
Equipment heat dissipation, current-dependent
PvidW111
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0
Low-voltage industrial components (EG000017) / Switch disconnector (EC000216)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Switch disconnector ([email protected] [AKF060010])
Version as main switch
  Yes
Version as maintenance-/service switch
  Yes
Version as safety switch
  No
Version as emergency stop installation
  Yes
Version as reversing switch
  No
Max. rated operation voltage Ue AC
 V400
Rated operating voltage
 V690 - 690
Rated permanent current Iu
 A1000
Rated permanent current at AC-21, 400 V
 A0
Rated operation power at AC-3, 400 V
 kW0
Rated short-time withstand current lcw
 kA25
Rated operation power at AC-23, 400 V
 kW560
Switching power at 400 V
 kW0
Conditioned rated short-circuit current Iq
 kA100
Number of poles
  4
Number of auxiliary contacts as normally closed contact
  0
Number of auxiliary contacts as normally open contact
  0
Number of auxiliary contacts as change-over contact
  0
Motor drive optional
  Yes
Motor drive integrated
  No
Voltage release optional
  Yes
Device construction
  Built-in device fixed built-in technique
Suitable for ground mounting
  Yes
Suitable for front mounting 4-hole
  No
Suitable for front mounting center
  No
Suitable for distribution board installation
  Yes
Suitable for intermediate mounting
  Yes
Colour control element
  Grey
Type of control element
  Rocker lever
Interlockable
  Yes
Type of electrical connection of main circuit
  Bolt connection
Degree of protection (IP), front side
  IP20
Dimensions
IL01210018Z circuit-breaker LZM4, switch-disconnector LN4
 
>>

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação
Você tem dúvidas com a compra?

Se você tiver dúvidas compra, você pode visitar os seguintes links ou e-mail

Espere por favor





* Campos obrigatórios

ou