TM-1-8291/EZ 015073 EATON MOELLER interruptor rotativo, Iu: 10A 440V AC-21 Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

TM-1-8291/EZ 015073 EATON MOELLER interruptor rotativo, Iu: 10A 440V AC-21

TM-1-8291/EZ

015073

EATON - MOELLER

Disponível

Envio hoje

interruptor rotativo, Iu: 10A 440V AC-21

Mais detalhes


Interruptores

T Cam switches and P Switch-disconnectors - EATON - MOELLER

Switch-disconnectors - changeover switches - EATON - MOELLER

* Produto novo em sua embalagem original com todas as garantias e certificações de EATON - MOELLER

QuantidadePreço
1+$31.20
7+$28.31
13+$27.69
19+$27.37
26+$27.13
*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Como funciona

Como é que isso funciona?

1 Adicione os produtos de sua escolha ao carrinho de compras
2 Introduza os seus dados de contato e envie sua solicitação
3 Você será notificado por e-mail com a nossa cotação
4 Você simplesmente aceite o orçamento e espere a sua encomenda

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Produtos relacionados

Mais informação



Delivery programme
Product range
  Control switches
Part group reference
  TM
Basic function
  ON-OFF switches
 
  with black thumb grip and front plate
Contacts
  2
Degree of Protection
  Front IP65
Design
  centre mounting
 
  
General
Standards
  IEC/EN 60947, VDE 0660, CSA, UL
Control switch as per IEC/EN 60947-5-1
Auxiliary switch as per IEC/EN 60947-5-1
Climatic proofing
  Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
   
Open
 °C-25 - +50
Overvoltage category/pollution degree
  III/3
Rated impulse withstand voltage
UimpV AC4000
Mounting position
  As required
Protection against direct contact when actuated from front (EN 50274)
  Finger and back-of-hand proof
Contacts
Electrical characteristics
   
Rated operational voltage
UeV AC500
Rated uninterrupted current
IuA10
Note on rated uninterrupted current !u
  Rated uninterrupted current Iu is specified for max. cross-section.
Short-circuit rating
   
Fuse
 A gG/gL10
Switching capacity
Safe isolation to EN 61140
   
Current heat loss per contact at Ie
 W0.15
Current heat loss per auxiliary circuit at Ie (AC-15/230 V)
 CO0.15
Lifespan, mechanical
Operationsx 106> 1
Maximum operating frequency
Operations/h 1200
Control circuit reliability at 24 V DC, 10 mA
Fault probabilityHF< 10 -5, < 1 fault in 100000 operations
Terminal capacities
Solid or stranded
 mm21 x 1,5
2 x 1,5
Flexible
 mm21 x 1.5
2 x 1.5
Terminal screw
  M2.5
Max. tightening torque
 Nm0.35
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA10
Heat dissipation per pole, current-dependent
PvidW0.15
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW0
Heat dissipation capacity
PdissW0
Operating ambient temperature min.
 °C-25
Operating ambient temperature max.
 °C50
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Please enquire
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
Low-voltage industrial components (EG000017) / Switch disconnector (EC000216)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Switch disconnector ([email protected] [AKF060010])
Version as main switch
  No
Version as maintenance-/service switch
  No
Version as safety switch
  No
Version as emergency stop installation
  No
Version as reversing switch
  No
Max. rated operation voltage Ue AC
 V500
Rated operating voltage
 V500 - 500
Rated permanent current Iu
 A10
Rated permanent current at AC-21, 400 V
 A0
Rated operation power at AC-3, 400 V
 kW0
Rated short-time withstand current lcw
 kA0
Rated operation power at AC-23, 400 V
 kW0
Switching power at 400 V
 kW0
Conditioned rated short-circuit current Iq
 kA0
Number of poles
  2
Number of auxiliary contacts as normally closed contact
  0
Number of auxiliary contacts as normally open contact
  0
Number of auxiliary contacts as change-over contact
  0
Motor drive optional
  No
Motor drive integrated
  No
Voltage release optional
  No
Device construction
  Built-in device fixed built-in technique
Suitable for ground mounting
  No
Suitable for front mounting 4-hole
  No
Suitable for front mounting center
  Yes
Suitable for distribution board installation
  No
Suitable for intermediate mounting
  No
Colour control element
  Black
Type of control element
  Toggle
Interlockable
  No
Type of electrical connection of main circuit
  Screw connection
Degree of protection (IP), front side
  IP65
Approvals
Product Standards  UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94; IEC/EN 60947-3; CE marking
UL File No.  E36332
UL Category Control No.  NLRV
CSA File No.  UL report applies to both US and Canada
CSA Class No.  
North America Certification  UL listed, certified by UL for use in Canada
Degree of Protection  IEC: IP65; UL/CSA Type: –
Dimensions
IL03801025Z On-Off-switch, changeover switch, control switch
 
>>

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação
Você tem dúvidas com a compra?

Se você tiver dúvidas compra, você pode visitar os seguintes links ou e-mail

Espere por favor





* Campos obrigatórios

ou