SWD4-SF8-67 116033 EATON MOELLER SWD Conector Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

SWD4-SF8-67 116033 EATON MOELLER SWD Conector

SWD4-SF8-67

116033

EATON - MOELLER

Disponível

Envio hoje

SWD - Conector

Mais detalhes


Relés Programáveis

SmartWire-DT

SmartWire-DT - EATON - MOELLER

* Produto novo em sua embalagem original com todas as garantias e certificações de EATON - MOELLER

QuantidadePreço
1+$15.84
12+$13.83
24+$13.49
35+$13.33
47+$13.22
*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Como funciona

Como é que isso funciona?

1 Adicione os produtos de sua escolha ao carrinho de compras
2 Introduza os seus dados de contato e envie sua solicitação
3 Você será notificado por e-mail com a nossa cotação
4 Você simplesmente aceite o orçamento e espere a sua encomenda

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Produtos relacionados

Mais informação



Delivery programme
Product range
  SmartWire-DT accessories
Basic function
  Plug/socket
Basic function accessories
  Plug-in connection
Function
  Plug connector for 8-pole SWD4-…LR8-24 round cables
Description
  8 pole socket
Straight
Soldering connection
Connection to SmartWire-DT
  yes
For use with
  SWD4-SM8-20
SWD4-SML8-20
Technical data
General
Dimensions (W x H x D)
 mm666666
Mounting position
  As required
Power loss
PW0
Note on heat dissipation
  not relevant
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
  IP67
Climatic environmental conditions
Ambient temperature
   
Relative humidity
   
Condensation
  Take appropriate measures to prevent condensation
Connection options
Connection 1
  M20 socket, 8-pin, solder terminal
Number of insertion cycles
  ≥ 500
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification
   
Rated operational current for specified heat dissipation
InA0
Heat dissipation per pole, current-dependent
PvidW0
Equipment heat dissipation, current-dependent
PvidW0
Static heat dissipation, non-current-dependent
PvsW0
Heat dissipation capacity
PdissW0
Operating ambient temperature max.
 °C90
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Meets the product standard's requirements.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0(Show features)(Hide features)
PLC's (EG000024) / Accessories for controls (EC002584)
Electric engineering, automation, process control engineering / Control / Control (accessories) / Control (accessories, unspecified) ([email protected] [AKN560011])
Type of electrical accessory
  Plug
Type of mechanical accessory
  -
Type of documentation
  -
Approvals
North America Certification  Request filed for UL and CSA
Specially designed for North America  No
Dimensions
IL04716001Z (AWA1160-2512) SmartWire-DT: Wiring material and accessories
 
>
>
>
>
>>

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação
Você tem dúvidas com a compra?

Se você tiver dúvidas compra, você pode visitar os seguintes links ou e-mail

Espere por favor





* Campos obrigatórios

ou