NZM4-XTVDV-60-NA 100670 EATON MOELLER maçaneta da porta do acoplamento com unidade rotativa Ver maior
As imagens são só a título ilustrativo. Por favor, consulte a ficha técnica.

NZM4-XTVDV-60-NA 100670 EATON MOELLER maçaneta da porta do acoplamento com unidade rotativa

NZM4-XTVDV-60-NA

100670

EATON - MOELLER

Disponível

Envio hoje

Produto sob demanda, sem reembolso.

maçaneta da porta do acoplamento com unidade rotativa

Mais detalhes


Disjuntores

Circuit-breakers NZM and LZM (Accessories) - EATON - MOELLER

Door coupling rotary handles - EATON - MOELLER

* Produto novo em sua embalagem original com todas as garantias e certificações de EATON - MOELLER

QuantidadePreço
1+$160.18
2+$156.42
3+$154.56
4+$154.17
*Este preço é por unidade e mostra o valor líquido (excluindo impostos indirectos se aplicável).

Como funciona

Como é que isso funciona?

1 Adicione os produtos de sua escolha ao carrinho de compras
2 Introduza os seus dados de contato e envie sua solicitação
3 Você será notificado por e-mail com a nossa cotação
4 Você simplesmente aceite o orçamento e espere a sua encomenda

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Produtos relacionados

Mais informação



Delivery programme
Accessories
  Door coupling rotary handle
Product range
  Accessories
Standard/Approval
  UL/CSA, IEC
Construction size
  NZM4
Description
  Door coupling rotary handle for operating the switch through a closed control panel door
Function
  Standard, black/grey
Protection class
  IP66
UL/CSA Type 4X, Type 12
Locking facility
  lockable on the handle on the switch using up to 3 padlocks
With door interlock
Door interlock
  Not defeated in the locked OFF position.
Door opens only with active rotation beyond the 0 position
Can be modified such that it can be defeated from the outside using a screwdriver
Project planning information
  Complete including rotary drive and coupling parts
Extension shaft additionally required.
Cannot be combined with mechanical interlock
For maximum shaft length 60 mm
Without shaft support
Cannot be combined with NZM...-XDZ additional handle
External warning plate/designation label can be clipped on.
For use with
  NZM4, N(S)4
lockable
  single
Design verification as per IEC/EN 61439(Show features)(Hide features)
IEC/EN 61439 design verification
   
10.2 Strength of materials and parts
   
10.2.2 Corrosion resistance
  Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
  Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
  Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
  Meets the product standard's requirements.
10.2.5 Lifting
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
  Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
  Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
  Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
  Meets the product standard's requirements.
10.5 Protection against electric shock
  Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
  Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
  Is the panel builder's responsibility.
10.8 Connections for external conductors
  Is the panel builder's responsibility.
10.9 Insulation properties
   
10.9.2 Power-frequency electric strength
  Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
  Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
  Is the panel builder's responsibility.
10.10 Temperature rise
  The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
  Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
  The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 6.0
Low-voltage industrial components (EG000017) / Handle for power circuit breaker (EC000229)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Handle for switch devices ([email protected] [AKF012011])
Lockable
  Yes
Colour
  Black
Suitable for emergency stop
  No
With axe
  No
Suitable for power circuit breaker
  Yes
Suitable for switch disconnector
  Yes
Approvals
Product Standards  UL489; CSA-C22.2 No. 5-09; IEC60947, CE marking
UL File No.  E140305
UL Category Control No.  DIHS
CSA File No.  022086
CSA Class No.  1437-01
North America Certification  UL listed, CSA certified
Specially designed for North America  Rotary handle with additional 4th position, beyond OFF, to release door interlock.
Degree of Protection  IEC: IP66, UL/CSA Type 4X, 12
Dimensions
IL01210003Z (AWA1230-2025) Door coupling rotary handle
 
>>

Datasheet - PDF

Avaliações: (0)

Não há comentários do produto ainda.

Adicionar avaliação
ocultar formulário
Avaliação:
Nome:
Email:
Título:
Opinión:
  Captcha
  Adicionar avaliação
Você tem dúvidas com a compra?

Se você tiver dúvidas compra, você pode visitar os seguintes links ou e-mail

Espere por favor





* Campos obrigatórios

ou