LD32CNP10PPM5T CARLO GAVAZZI Parametri selezionati SISTEMA Retro riflettente polarizzato CUSTODIA rettangola..

Photoelectrics
Laser, Retro-reflective, Polarized
Type LD32CNP10
• Miniature sensor range
• Range: 0.1-1 m, with reflector
• Sensitivity adjustment by Teach-In programming
• Modulated, red laser light 650 nm, polarized (class 2)
• Supply voltage: 10 to 30 VDC
• Output: 100 mA, NPN or PNP preset
• Make and break switching function programmable
• LED for output indication and power ON
• Protection: reverse polarity, short circuit and transients
• Cable and plug versions
• Excellent EMC performance
Product Description
Ordering Key
L D32CNP10PPM5T
The LD32CNP10 sensor family comes in a compact 12 x 32 x 20 mm reinforced PMMA/ ABS-housing.
The sensors are useful in applications where high- accuracy detection as well as small size is required.
The Teach-In function for
adjustment of the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is programmable (NO or NC). The small laser spot makes it possible to detect small objects very precisely.
Type
Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration Connection type Teach-In
Type Selection
Housing Range Ordering no. Ordering no.
W x H x D Sn NPN & PNP cable NPN & PNP plug
Make & break switching Make & break switching
12 x 32 x 20 mm 1.0 m LD 32 CNP 10 NPT LD 32 CNP 10 NPM5T LD 32 CNP 10 PPT LD 32 CNP 10 PPM5T
Specifications
Rated operating distance (Sn) Up to 1.0 m,
with reflector 51 x 51 mm
(ER5060)
Blind zone 100 mm
Sensitivity Adjustable by Teach-In
(push button or wire)
Temperature drift ≤ 1%/ºC
Hysteresis (H)
(differential travel) ≤ 10%
Rated operational volt. (UB ) 10 to 30 VDC (ripple included)
Ripple (Urpp ) ≤ 10%
Output current
Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)
No load supply current (Io) ≤ 25 mA @ 24 VDC
Minimum operational current (Im) 0.5 mA
OFF-state current (Ir ) ≤ 100 µA
Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Laser protection class Class 2 - according to
EN60825-1-3/97
Average power < 1 mW Pulse width t = 3 µs Pulse repetition time f = 5 kHz
MTBF > 50’000 h @ Ta = 40ºC
Light source Red laser light, 650 nm
Light type Red, modulated
Sensing angle < 0.8º
Ambient light 5,000 lux
Light spot < 1 mm @ 300 mm
Operating frequency 1000 Hz
Response time
OFF-ON (tON) ≤ 0.5 ms
ON-OFF (tOFF ) ≤ 0.5 ms
Power ON delay (tv) ≤ 300 ms
Output function
NPN and PNP Preset
NO/NC switching function Set up by button
Specifications are subject to change without notice (10.02.06) 1