G34960003700 CARLO GAVAZZI Parametri selezionati MODULO TIPO Interfaccia seriale CUSTODIA DIN-rail I/O TIPO ..

Dupline®
Plug & Play Master Module
Du line®
Interface for Mitsubishi PLC
Type G 3496 0003
Fieldbus Installationbus
• Interface for Mitsubishi PLC with the function of a master
• Plug and play: Automatic communication with specific
PLC/Controllers
• Built-in normal Dupline® Channel Generator
• 128 I/O’s and DC power supply on 3 wires
• RS232/RS422/RS485 port for interfacing to control system
• Split-I/O mode selectable (128 inputs and 128 outputs)
• LED-indications for supply, Dupline® carrier and Com- port TX
• Galvanically isolated Com-port supplied by internal
DC/DC converter
Product Description Ordering Key
G 3496 0003 700
G 3496 0003 is designed as a cost-effective solution for interfacing Dupline® I/O’s to a Mitsubishi PLC. It performs three functions: Dupline®
channel generator, power supply synchronization (en- ables 3-wire system with supply) and RS232/RS422/ RS485 interface.
Type: Dupline® H4-Housing Combined module Interface type
DC supply
Type Selection
Supply PLC Interface Conformance Ordering no.
20-30 VDC Mitsubishi FX-serie G 3496 0003 700
Mitsubishi AnS-serie with interface module
Input/Output Specifications
Power output
Output voltage 20-30 VDC (pulsating) Output current < 3.0 A @ 50ºC
Short circuit protection 4 A quick acting fuse
Output voltage drop < 1.0 V
Dupline® carrier
Output voltage 8.2 V (pulsating) Current < 60 mA
Short circuit protection Yes
Scan time
128 channels 132.2 ms
64 channels 69.8 ms
Communication port
Input/Output Specifications (Cont.)
Pin assignment
2-wire RS 485
S/R Data line + (B) Pin 3
S/R Data line - (A) Pin 8
GND Pin 5
4-wire RS 485/RS 422
R Data line + (B) Pin 3
R Data line - (A) Pin 8
S Data line + (B) Pin 2
S Data line - (A) Pin 7
Direction Pin 4
(Connect to GND pin 5 when using 4-wire commu-
Standard RS232/RS422/RS485
RS 232
nication)
Split I/O mode Yes, selectable Normal Dupline mode Yes, selectable Connection 9 pole female Sub-D Dielectric voltage
Com-port Dupline® 1 kVAC (rms) Protocol Programming Port
Baud rate 9600
Data bits 7
Start bit 1
Stop bit 1
Parity Even
Flow-control None
Protocol Dedicated Protocol
Baud rate 19200
Data bits 8
Start bit 1
Stop bit 1
Parity None
Flow-control None
TX Pin 1
RX Pin 9
GND Pin 5
Supply Specifications
Power supply Overvoltage cat. III (IEC 60664) Operational voltage (Vin) 20-30 VDC
Reverse polarity protection None
Current consumption < 150 mA + Power load
Power dissipation < 5 W Transient protection voltage 800 V Dielectric voltage
Supply - Dupline® None
Supply - com-port 1 kVAC (rms)
Specifications are subject to change without notice (09.12.05) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group